4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Arnd Bergmann <arnd@xxxxxxxx> commit ca32e0c4bf9ca4b87089c5a5ce945e5f2ec890da upstream. dtc warns about obviously incorrect GPIO numbers for the audio codec on both lpc32xx boards: arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 It looks like the nodes are written for a different binding that combines the GPIO number into a single number rather than a bank/number pair. I found the right numbers on stackexchange.com, so this patch fixes the warning and has a reasonable chance of getting things to actually work. Cc: stable@xxxxxxxxxxxxxxx Link: https://unix.stackexchange.com/questions/59497/alsa-asoc-how-to-correctly-load-devices-drivers/62217#62217 Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/lpc3250-ea3250.dts | 4 ++-- arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -156,8 +156,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; }; --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -81,8 +81,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; };