This is a note to let you know that I've just added the patch titled
mmc: sdhci-of-esdhc: disable SD clock for clock value 0
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-of-esdhc-disable-sd-clock-for-clock-value-0.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From dd3f6983b4a468efca9e8caa0e2b4aa20946d801 Mon Sep 17 00:00:00 2001
From: yangbo lu <yangbo.lu@xxxxxxx>
Date: Thu, 21 Sep 2017 16:43:31 +0800
Subject: mmc: sdhci-of-esdhc: disable SD clock for clock value 0
From: yangbo lu <yangbo.lu@xxxxxxx>
commit dd3f6983b4a468efca9e8caa0e2b4aa20946d801 upstream.
SD clock should be disabled for clock value 0. It's not
right to just return. This may cause failure of signal
voltage switching.
Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-esdhc.c | 58 +++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 28 deletions(-)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -458,6 +458,33 @@ static unsigned int esdhc_of_get_min_clo
return clock / 256 / 16;
}
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+ u32 val;
+ ktime_t timeout;
+
+ val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+ if (enable)
+ val |= ESDHC_CLOCK_SDCLKEN;
+ else
+ val &= ~ESDHC_CLOCK_SDCLKEN;
+
+ sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ val = ESDHC_CLOCK_STABLE;
+ while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
+ if (ktime_after(ktime_get(), timeout)) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ udelay(10);
+ }
+}
+
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -469,8 +496,10 @@ static void esdhc_of_set_clock(struct sd
host->mmc->actual_clock = 0;
- if (clock == 0)
+ if (clock == 0) {
+ esdhc_clock_enable(host, false);
return;
+ }
/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
if (esdhc->vendor_ver < VENDOR_V_23)
@@ -558,33 +587,6 @@ static void esdhc_pltfm_set_bus_width(st
sdhci_writel(host, ctrl, ESDHC_PROCTL);
}
-static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
-{
- u32 val;
- ktime_t timeout;
-
- val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-
- if (enable)
- val |= ESDHC_CLOCK_SDCLKEN;
- else
- val &= ~ESDHC_CLOCK_SDCLKEN;
-
- sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
-
- /* Wait max 20 ms */
- timeout = ktime_add_ms(ktime_get(), 20);
- val = ESDHC_CLOCK_STABLE;
- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
- if (ktime_after(ktime_get(), timeout)) {
- pr_err("%s: Internal clock never stabilised.\n",
- mmc_hostname(host->mmc));
- break;
- }
- udelay(10);
- }
-}
-
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
Patches currently in stable-queue which might be from yangbo.lu@xxxxxxx are
queue-4.14/mmc-sdhci-of-esdhc-fix-the-mmc-error-after-sleep-on-ls1046ardb.patch
queue-4.14/mmc-sdhci-of-esdhc-disable-sd-clock-for-clock-value-0.patch