Hi Hans,
> Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix
> with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA
> USB Bluetooth modules. But it turns out that the resume problems are not
> caused by the QCA Rome chipset, on most platforms it resumes fine. The
> resume problems are actually a platform problem (likely the platform
> cutting all power when suspended).
>
> The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by
> matching on usb-ids, we're causing all boards with these chips to use extra
> power, to fix resume problems which only happen on some boards.
>
> This commit fixes this by applying the quirk based on DMI matching instead
> of on usb-ids, so that we match the platform and not the chipset.
>
> Here is the /sys/kernel/debug/usb/devices for the Bluetooth module:
>
> T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=e300 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
> Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..")
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: Brian Norris <briannorris@xxxxxxxxxxxx>
> Cc: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> Reported-and-tested-by: Kevin Fenzi <kevin@xxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> drivers/bluetooth/btusb.c | 26 ++++++++++++++++++++------
> 1 file changed, 20 insertions(+), 6 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel