Re: [PATCH] phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Friday 19 January 2018 08:15 PM, Maxime Ripard wrote:
> On Fri, Jan 19, 2018 at 05:25:41PM +0800, Chen-Yu Tsai wrote:
>> The AXP223 PMIC, like the AXP221, does not generate VBUS change
>> interrupts when N_VBUSEN is used to drive VBUS for the OTG port
>> on the board.
>>
>> This was not noticed until recently, as most A23/A33 boards use
>> a GPIO pin that does not support interrupts for OTG ID detection.
>> This forces the driver to use polling. However the A33-OlinuXino
>> uses a pin that does support interrupts, so the driver uses them.
>> However the VBUS interrupt never fires, and the driver never gets
>> to update the VBUS status. This results in musb timing out waiting
>> for VBUS to rise.
>>
>> This was worked around for the AXP221 by resorting to polling
>> changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for
>> missing Vbus det interrupts on A31"). This patch adds the A23 and
>> A33 to the list of SoCs that need the workaround.
>>
>> Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the
>> 		      sun8i-a33 SoC")
>> Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the
>> 		      sun8i-a23 SoC")
>> Cc: <stable@xxxxxxxxxxxxxxx> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb:
>> 		Use of_match_node to get model specific config data
>> Cc: <stable@xxxxxxxxxxxxxxx> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb:
>> 		Fix optional gpios failing probe
>> Cc: <stable@xxxxxxxxxxxxxxx> # 4.3.x: 04e59a0211ff phy-sun4i-usb:
>> 		Fix irq free conditions to match request conditions
>> Cc: <stable@xxxxxxxxxxxxxxx> # 4.3.x: 91d96f06a760 phy-sun4i-usb:
>> 		Add workaround for missing Vbus det interrupts on A31
>> Cc: <stable@xxxxxxxxxxxxxxx> # 4.3.x
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>> ---
>>
>> This list might get longer if the newer AXP8xx PMICs also have this
>> behavior. We could switch to a boolean in the per-compatible data,
>> or just always use polling. The yet-merged R40 support will have this
>> issue as well, as the R40 is paired with the AXP221. But for now,
>> I'd like to have something that is easier to backport to stable, so
>> we can at least fix this for the A23 and A33.
>>
>> Also, checkpatch.pl doesn't like the stable kernel prerequisite lines.
> 
> Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>

merged, thanks!

-Kishon



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]