With commit 3cf32d180227 ("mtd: nand: vf610: switch to mtd_ooblayout_ops") the driver started to use the NAND cores default large page ooblayout. However, shortly after commit 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") changed the default layout to the old hamming layout, which is not what vf610_nfc is using. Specify the default large page layout explicitly. Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") Cc: <stable@xxxxxxxxxxxxxxx> # v4.12+ Signed-off-by: Stefan Agner <stefan@xxxxxxxx> --- drivers/mtd/nand/vf610_nfc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 80d31a58e558..f367144f3c6f 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -752,10 +752,8 @@ static int vf610_nfc_probe(struct platform_device *pdev) if (mtd->oobsize > 64) mtd->oobsize = 64; - /* - * mtd->ecclayout is not specified here because we're using the - * default large page ECC layout defined in NAND core. - */ + /* Use default large page ECC layout defined in NAND core */ + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); if (chip->ecc.strength == 32) { nfc->ecc_mode = ECC_60_BYTE; chip->ecc.bytes = 60; -- 2.16.1