[PATCH 3/4] clk: bcm2835: De-assert/assert PLL reset signal when appropriate

[Boris Brezillon <boris.brezillon@xxxxxxxxxxx>]

In order to enable a PLL, not only the PLL has to be powered up and
locked, but you also have to de-assert the reset signal. The last part
was missing. Add it so PLLs that were not enabled by the FW/bootloader
can be enabled from Linux.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
---
 drivers/clk/bcm/clk-bcm2835.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index a07f6451694a..6c5d4a8e426c 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -602,6 +602,9 @@ static void bcm2835_pll_off(struct clk_hw *hw)
 	const struct bcm2835_pll_data *data = pll->data;
 
 	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) &
+		     ~A2W_PLL_CTRL_PRST_DISABLE);
 	cprman_write(cprman, data->cm_ctrl_reg,
 		     cprman_read(cprman, data->cm_ctrl_reg) |
 		     CM_PLL_ANARST);
@@ -640,6 +643,10 @@ static int bcm2835_pll_on(struct clk_hw *hw)
 		cpu_relax();
 	}
 
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PRST_DISABLE);
+
 	return 0;
 }
 
-- 
2.14.1