3.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Stefan Agner <stefan@xxxxxxxx> commit d593574aff0ab846136190b1729c151c736727ec upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by: Stefan Agner <stefan@xxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/spi/spi-imx.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1220,12 +1220,23 @@ static int spi_imx_remove(struct platfor { struct spi_master *master = platform_get_drvdata(pdev); struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + int ret; spi_bitbang_stop(&spi_imx->bitbang); + ret = clk_enable(spi_imx->clk_per); + if (ret) + return ret; + + ret = clk_enable(spi_imx->clk_ipg); + if (ret) { + clk_disable(spi_imx->clk_per); + return ret; + } + writel(0, spi_imx->base + MXC_CSPICTRL); - clk_unprepare(spi_imx->clk_ipg); - clk_unprepare(spi_imx->clk_per); + clk_disable_unprepare(spi_imx->clk_ipg); + clk_disable_unprepare(spi_imx->clk_per); spi_imx_sdma_exit(spi_imx); spi_master_put(master);