From: Sean Wang <sean.wang@xxxxxxxxxxxx> [ Upstream commit 7352e252b5bf40d59342494a70354a2d436fd0cd ] The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx> --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 5e81a7263654..3fd71cf5cd60 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1959,11 +1959,12 @@ static int mtk_hw_init(struct mtk_eth *eth) /* set GE2 TUNE */ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0); - /* GE1, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0)); - - /* GE2, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1)); + /* Set linkdown as the default for each GMAC. Its own MCR would be set + * up with the more appropriate value when mtk_phy_link_adjust call is + * being invoked. + */ + for (i = 0; i < MTK_MAC_COUNT; i++) + mtk_w32(eth, 0, MTK_MAC_MCR(i)); /* Indicates CDM to parse the MTK special tag from CPU * which also is working out for untag packets. -- 2.11.0