From: Alexei Starovoitov <ast@xxxxxxxxxx>
[ upstream commit 290af86629b25ffd1ed6232c4e9107da031705cb ]
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715.
A quote from goolge project zero blog:
"At this point, it would normally be necessary to locate gadgets in
the host kernel code that can be used to actually leak data by reading
from an attacker-controlled location, shifting and masking the result
appropriately and then using the result of that as offset to an
attacker-controlled address for a load. But piecing gadgets together
and figuring out which ones work in a speculation context seems annoying.
So instead, we decided to use the eBPF interpreter, which is built into
the host kernel - while there is no legitimate way to invoke it from inside
a VM, the presence of the code in the host kernel's text section is sufficient
to make it usable for the attack, just like with ordinary ROP gadgets."
To make attacker job harder introduce BPF_JIT_ALWAYS_ON config
option that removes interpreter from the kernel in favor of JIT-only mode.
So far eBPF JIT is supported by:
x64, arm64, arm32, sparc64, s390, powerpc64, mips64
The start of JITed program is randomized and code page is marked as read-only.
In addition "constant blinding" can be turned on with net.core.bpf_jit_harden
v2->v3:
- move __bpf_prog_ret0 under ifdef (Daniel)
v1->v2:
- fix init order, test_bpf and cBPF (Daniel's feedback)
- fix offloaded bpf (Jakub's feedback)
- add 'return 0' dummy in case something can invoke prog->bpf_func
- retarget bpf tree. For bpf-next the patch would need one extra hunk.
It will be sent when the trees are merged back to net-next
Considered doing:
int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT;
but it seems better to land the patch as-is and in bpf-next remove
bpf_jit_enable global variable from all JITs, consolidate in one place
and remove this jit_init() function.
Signed-off-by: Alexei Starovoitov <ast@xxxxxxxxxx>
Signed-off-by: Daniel Borkmann <daniel@xxxxxxxxxxxxx>
---
arch/arm64/Kconfig | 1 +
arch/s390/Kconfig | 1 +
arch/x86/Kconfig | 1 +
init/Kconfig | 7 +++++++
kernel/bpf/core.c | 24 +++++++++++++++++++++++-
lib/test_bpf.c | 13 ++++++++-----
net/Kconfig | 3 +++
net/core/filter.c | 4 +++-
net/core/sysctl_net_core.c | 6 ++++++
net/socket.c | 9 +++++++++
10 files changed, 62 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 14cdc6d..83af36d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -54,6 +54,7 @@ config ARM64
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
+ select HAVE_EBPF_JIT
select HAVE_C_RECORDMCOUNT
select HAVE_CC_STACKPROTECTOR
select HAVE_CMPXCHG_DOUBLE
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 5ad7b72..2ee95ec 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -123,6 +123,7 @@ config S390
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
+ select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
select HAVE_CMPXCHG_DOUBLE
select HAVE_CMPXCHG_LOCAL
select HAVE_DEBUG_KMEMLEAK
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 75d0053..2db9304 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -88,6 +88,7 @@ config X86
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_BPF_JIT if X86_64
+ select HAVE_EBPF_JIT if X86_64
select HAVE_CC_STACKPROTECTOR
select HAVE_CMPXCHG_DOUBLE
select HAVE_CMPXCHG_LOCAL
diff --git a/init/Kconfig b/init/Kconfig
index 235c7a2..ef2f97d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1556,6 +1556,13 @@ config BPF_SYSCALL
Enable the bpf() system call that allows to manipulate eBPF
programs and maps via file descriptors.
+config BPF_JIT_ALWAYS_ON
+ bool "Permanently enable BPF JIT and remove BPF interpreter"
+ depends on BPF_SYSCALL && HAVE_EBPF_JIT && BPF_JIT
+ help
+ Enables BPF JIT and removes BPF interpreter to avoid
+ speculative execution of BPF instructions by the interpreter
+
config SHMEM
bool "Use full shmem filesystem" if EXPERT
default y
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index e54ea31..c40e25e 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -256,6 +256,7 @@ noinline u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5)
}
EXPORT_SYMBOL_GPL(__bpf_call_base);
+#ifndef CONFIG_BPF_JIT_ALWAYS_ON
/**
* __bpf_prog_run - run eBPF program on a given context
* @ctx: is the data we are operating on
@@ -725,6 +726,13 @@ static unsigned int __bpf_prog_run(void *ctx, const struct bpf_insn *insn)
return 0;
}
+#else
+static unsigned int __bpf_prog_ret0(void *ctx, const struct bpf_insn *insn)
+{
+ return 0;
+}
+#endif
+
bool bpf_prog_array_compatible(struct bpf_array *array,
const struct bpf_prog *fp)
{
@@ -771,9 +779,23 @@ static int bpf_check_tail_call(const struct bpf_prog *fp)
*/
int bpf_prog_select_runtime(struct bpf_prog *fp)
{
+#ifndef CONFIG_BPF_JIT_ALWAYS_ON
fp->bpf_func = (void *) __bpf_prog_run;
-
+#else
+ fp->bpf_func = (void *) __bpf_prog_ret0;
+#endif
+
+ /* eBPF JITs can rewrite the program in case constant
+ * blinding is active. However, in case of error during
+ * blinding, bpf_int_jit_compile() must always return a
+ * valid program, which in this case would simply not
+ * be JITed, but falls back to the interpreter.
+ */
bpf_int_jit_compile(fp);
+#ifdef CONFIG_BPF_JIT_ALWAYS_ON
+ if (!fp->jited)
+ return -ENOTSUPP;
+#endif
bpf_prog_lock_ro(fp);
/* The tail call compatibility check can only be done at
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 7e26aea..b7908d9 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -5304,9 +5304,8 @@ static struct bpf_prog *generate_filter(int which, int *err)
return NULL;
}
}
- /* We don't expect to fail. */
if (*err) {
- pr_cont("FAIL to attach err=%d len=%d\n",
+ pr_cont("FAIL to prog_create err=%d len=%d\n",
*err, fprog.len);
return NULL;
}
@@ -5325,7 +5324,11 @@ static struct bpf_prog *generate_filter(int which, int *err)
fp->type = BPF_PROG_TYPE_SOCKET_FILTER;
memcpy(fp->insnsi, fptr, fp->len * sizeof(struct bpf_insn));
- bpf_prog_select_runtime(fp);
+ *err = bpf_prog_select_runtime(fp);
+ if (*err) {
+ pr_cont("FAIL to select_runtime err=%d\n", *err);
+ return NULL;
+ }
break;
}
@@ -5511,8 +5514,8 @@ static __init int test_bpf(void)
pass_cnt++;
continue;
}
-
- return err;
+ err_cnt++;
+ continue;
}
pr_cont("jited:%u ", fp->jited);
diff --git a/net/Kconfig b/net/Kconfig
index 127da94..6d94140 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -388,3 +388,6 @@ endif # if NET
# Used by archs to tell that they support BPF_JIT
config HAVE_BPF_JIT
bool
+
+config HAVE_EBPF_JIT
+ bool
diff --git a/net/core/filter.c b/net/core/filter.c
index e943554..229bf08 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -984,7 +984,9 @@ static struct bpf_prog *bpf_migrate_filter(struct bpf_prog *fp)
*/
goto out_err_free;
- bpf_prog_select_runtime(fp);
+ err = bpf_prog_select_runtime(fp);
+ if (err)
+ goto out_err_free;
kfree(old_prog);
return fp;
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index f5ef211..6578a0a 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -292,7 +292,13 @@ static struct ctl_table net_core_table[] = {
.data = &bpf_jit_enable,
.maxlen = sizeof(int),
.mode = 0644,
+#ifndef CONFIG_BPF_JIT_ALWAYS_ON
.proc_handler = proc_dointvec
+#else
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &one,
+ .extra2 = &one,
+#endif
},
#endif
{
diff --git a/net/socket.c b/net/socket.c
index 2cf4f25..5b31e5b 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2534,6 +2534,15 @@ static int __init sock_init(void)
core_initcall(sock_init); /* early initcall */
+static int __init jit_init(void)
+{
+#ifdef CONFIG_BPF_JIT_ALWAYS_ON
+ bpf_jit_enable = 1;
+#endif
+ return 0;
+}
+pure_initcall(jit_init);
+
#ifdef CONFIG_PROC_FS
void socket_seq_show(struct seq_file *seq)
{
--
2.9.5