From: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
[ Upstream commit 952b6b3b07877419386e719ff20917170e1ce684 ]
The Marvell 10G PHY driver supports different hardware revisions, which
have their bits 3..0 differing. To get the correct revision number these
bits should be ignored. This patch fixes this by using the already
defined MARVELL_PHY_ID_MASK (0xfffffff0) instead of the custom
0xffffffff mask.
Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Suggested-by: Yan Markman <ymarkman@xxxxxxxxxxx>
Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/net/phy/marvell10g.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index aebc08beceba..21b3f36e023a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -16,6 +16,7 @@
* link takes priority and the other port is completely locked out.
*/
#include <linux/phy.h>
+#include <linux/marvell_phy.h>
enum {
MV_PCS_BASE_T = 0x0000,
@@ -338,7 +339,7 @@ static int mv3310_read_status(struct phy_device *phydev)
static struct phy_driver mv3310_drivers[] = {
{
.phy_id = 0x002b09aa,
- .phy_id_mask = 0xffffffff,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88x3310",
.features = SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Full |
@@ -360,7 +361,7 @@ static struct phy_driver mv3310_drivers[] = {
module_phy_driver(mv3310_drivers);
static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
- { 0x002b09aa, 0xffffffff },
+ { 0x002b09aa, MARVELL_PHY_ID_MASK },
{ },
};
MODULE_DEVICE_TABLE(mdio, mv3310_tbl);
--
2.11.0