Hi stable maintainers,
On Sun, Oct 29, 2017 at 04:27:21PM +0100, Jonas Gorski wrote:
> Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
> trigger I/F of FIFO buffers"), the port's default FCR value isn't used
> in serial8250_do_set_termios anymore, but copied over once in
> serial8250_config_port and then modified as needed.
>
> Unfortunately, serial8250_config_port will never be called if the port
> is shared between kernel and userspace, and the port's flag doesn't have
> UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
>
> This causes garbled output from userspace:
>
> [ 5.220000] random: procd urandom read with 49 bits of entropy available
> ers
> [kee
>
> Fix this by forcing it to be configured on boot, resulting in the
> expected output:
>
> [ 5.250000] random: procd urandom read with 50 bits of entropy available
> Press the [f] key and hit [enter] to enter failsafe mode
> Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
>
> Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
Please can this patch be applied to stable branches 3.17+. It is now
merged into mainline as commit 0a5191efe06b ("MIPS: AR7: ensure the port
type's FCR value is used").
Commit b084116f8587 ("MIPS: AR7: Ensure that serial ports are properly
set up") is a prerequisite for it to apply cleanly, but is already
tagged for stable.
Thanks
James
Attachment:
signature.asc
Description: Digital signature