From: Eric Wheeler <git@xxxxxxxxxxxxxxxxxx>
According to drbd.conf documentation, "To not break established and
expected behaviour, and suddenly cause fstrim on thin-provisioned LVs to
run out-of-space instead of freeing up space, the default value is yes."
This behavior regressed in the REQ_OP_WRITE_ZEROES refactor near
45c21793 drbd: implement REQ_OP_WRITE_ZEROES
0dbed96 drbd: make intelligent use of blkdev_issue_zeroout
which caused dm-thin backed DRBD volumes to zero blocks and run out of
space instead of passing discard to the backing device as defined by the
discard_zeroes_if_aligned option.
A helper function could reduce code duplication.
Signed-off-by: Eric Wheeler <drbd@xxxxxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 4.14
---
drivers/block/drbd/drbd_receiver.c | 22 ++++++++++++++++++++--
drivers/block/drbd/drbd_req.c | 23 +++++++++++++++++++++--
2 files changed, 41 insertions(+), 4 deletions(-)
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 62a902f..58f0e43 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1507,9 +1507,27 @@ void drbd_bump_write_ordering(struct drbd_resource *resource, struct drbd_backin
static void drbd_issue_peer_discard(struct drbd_device *device, struct drbd_peer_request *peer_req)
{
struct block_device *bdev = device->ldev->backing_bdev;
+ struct disk_conf *dc;
+ bool discard_zeroes_if_aligned, zeroout;
- if (blkdev_issue_zeroout(bdev, peer_req->i.sector, peer_req->i.size >> 9,
- GFP_NOIO, 0))
+ rcu_read_lock();
+ dc = rcu_dereference(device->ldev->disk_conf);
+ discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned;
+ rcu_read_unlock();
+
+ /* Use zeroout unless discard_zeroes_if_aligned is set.
+ * If blkdev_issue_discard fails, then retry with blkdev_issue_zeroout.
+ * See also drbd_process_discard_req() in drbd_req.c.
+ */
+ zeroout = true;
+ if (discard_zeroes_if_aligned &&
+ blkdev_issue_discard(bdev, peer_req->i.sector,
+ peer_req->i.size >> 9, GFP_NOIO, 0) == 0)
+ zeroout = false;
+
+ if (zeroout &&
+ blkdev_issue_zeroout(bdev, peer_req->i.sector,
+ peer_req->i.size >> 9, GFP_NOIO, 0) != 0)
peer_req->flags |= EE_WAS_ERROR;
drbd_endio_write_sec_final(peer_req);
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index de8566e..070b5e7 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -1158,9 +1158,28 @@ static int drbd_process_write_request(struct drbd_request *req)
static void drbd_process_discard_req(struct drbd_request *req)
{
struct block_device *bdev = req->device->ldev->backing_bdev;
+ struct drbd_device *device = req->device;
+ struct disk_conf *dc;
+ bool discard_zeroes_if_aligned, zeroout;
- if (blkdev_issue_zeroout(bdev, req->i.sector, req->i.size >> 9,
- GFP_NOIO, 0))
+ rcu_read_lock();
+ dc = rcu_dereference(device->ldev->disk_conf);
+ discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned;
+ rcu_read_unlock();
+
+ /* Use zeroout unless discard_zeroes_if_aligned is set.
+ * If blkdev_issue_discard fails, then retry with blkdev_issue_zeroout.
+ * See also drbd_issue_peer_discard() in drbd_receiver.c.
+ */
+ zeroout = true;
+ if (discard_zeroes_if_aligned &&
+ blkdev_issue_discard(bdev, req->i.sector, req->i.size >> 9,
+ GFP_NOIO, 0) == 0)
+ zeroout = false;
+
+ if (zeroout &&
+ blkdev_issue_zeroout(bdev, req->i.sector, req->i.size >> 9,
+ GFP_NOIO, 0) != 0)
req->private_bio->bi_status = BLK_STS_IOERR;
bio_endio(req->private_bio);
}
--
1.8.3.1