There are 2 control endpoint structures for DWC3. However, the driver
only updates the OUT direction control endpoint structure during
ConnectDone event. DWC3 driver needs to update the endpoint max packet
size for control IN endpoint as well. If the max packet size is not
properly set, then the driver will incorrectly calculate the data
transfer size and fail to send ZLP for HS/FS 3-stage control read
transfer.
The fix is simply to update the max packet size for the ep0 IN direction
during ConnectDone event.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 639dd1b163a0..21abea0ac622 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2744,6 +2744,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
break;
}
+ dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket;
+
/* Enable USB2 LPM Capability */
if ((dwc->revision > DWC3_REVISION_194A) &&
--
2.11.0