On Thu, Jan 11, 2018 at 12:36:16PM -0800, Ray Jui wrote:
> With the inbound DMA mapping supported added, the iProc PCIe driver
> parses DT property "dma-ranges" through call to
> "of_pci_dma_range_parser_init". In the case of BCMA, this results in a
> NULL pointer deference due to a missing of_node.
>
> Fix this by adding a guard in pcie-iproc-platform.c to only enable the
> inbound DMA mapping logic when DT property "dma-ranges" is present
>
> Fixes: dd9d4e7498de3 ("PCI: iproc: Add inbound DMA mapping support")
> Reported-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
> Tested-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> cc: <stable@xxxxxxxxxxxxxxx> # 4.10+
> ---
> drivers/pci/host/pcie-iproc-platform.c | 7 +++++++
> drivers/pci/host/pcie-iproc.c | 8 +++++---
> drivers/pci/host/pcie-iproc.h | 2 ++
> 3 files changed, 14 insertions(+), 3 deletions(-)
Applied to pci/dwc for 4.16, thanks.
Lorenzo
> diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
> index a5073a9..32228d4 100644
> --- a/drivers/pci/host/pcie-iproc-platform.c
> +++ b/drivers/pci/host/pcie-iproc-platform.c
> @@ -92,6 +92,13 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
> pcie->need_ob_cfg = true;
> }
>
> + /*
> + * DT nodes are not used by all platforms that use the iProc PCIe
> + * core driver. For platforms that require explict inbound mapping
> + * configuration, "dma-ranges" would have been present in DT
> + */
> + pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges");
> +
> /* PHY use is optional */
> pcie->phy = devm_phy_get(dev, "pcie-phy");
> if (IS_ERR(pcie->phy)) {
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> index 935909b..7583606 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -1378,9 +1378,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> }
> }
>
> - ret = iproc_pcie_map_dma_ranges(pcie);
> - if (ret && ret != -ENOENT)
> - goto err_power_off_phy;
> + if (pcie->need_ib_cfg) {
> + ret = iproc_pcie_map_dma_ranges(pcie);
> + if (ret && ret != -ENOENT)
> + goto err_power_off_phy;
> + }
>
> #ifdef CONFIG_ARM
> pcie->sysdata.private_data = pcie;
> diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
> index a6b55ce..4ac6282 100644
> --- a/drivers/pci/host/pcie-iproc.h
> +++ b/drivers/pci/host/pcie-iproc.h
> @@ -74,6 +74,7 @@ struct iproc_msi;
> * @ob: outbound mapping related parameters
> * @ob_map: outbound mapping related parameters specific to the controller
> *
> + * @need_ib_cfg: indicates SW needs to configure the inbound mapping window
> * @ib: inbound mapping related parameters
> * @ib_map: outbound mapping region related parameters
> *
> @@ -101,6 +102,7 @@ struct iproc_pcie {
> struct iproc_pcie_ob ob;
> const struct iproc_pcie_ob_map *ob_map;
>
> + bool need_ib_cfg;
> struct iproc_pcie_ib ib;
> const struct iproc_pcie_ib_map *ib_map;
>
> --
> 2.1.4
>