[PATCH 4.9 20/39] kaiser: enhanced by kernel and user PCIDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@xxxxxxxxxx>


Merged performance improvements to Kaiser, using distinct kernel
and user Process Context Identifiers to minimize the TLB flushing.

[This work actually all from Dave Hansen 2017-08-30:
still omitting trackswitch mods, and KAISER_REAL_SWITCH deleted.]

Signed-off-by: Hugh Dickins <hughd@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/x86/entry/entry_64.S                   |   10 ++++-
 arch/x86/entry/entry_64_compat.S            |    1 
 arch/x86/include/asm/cpufeatures.h          |    1 
 arch/x86/include/asm/kaiser.h               |   15 ++++++-
 arch/x86/include/asm/pgtable_types.h        |   26 +++++++++++++
 arch/x86/include/asm/tlbflush.h             |   54 +++++++++++++++++++++++-----
 arch/x86/include/uapi/asm/processor-flags.h |    3 +
 arch/x86/kernel/cpu/common.c                |   34 +++++++++++++++++
 arch/x86/kvm/x86.c                          |    3 +
 arch/x86/mm/kaiser.c                        |    7 +++
 arch/x86/mm/tlb.c                           |   46 ++++++++++++++++++++++-
 11 files changed, 182 insertions(+), 18 deletions(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1317,7 +1317,10 @@ ENTRY(nmi)
 	/* %rax is saved above, so OK to clobber here */
 	movq	%cr3, %rax
 	pushq	%rax
-	andq	$(~KAISER_SHADOW_PGD_OFFSET), %rax
+	/* mask off "user" bit of pgd address and 12 PCID bits: */
+	andq	$(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
+	/* Add back kernel PCID and "no flush" bit */
+	orq	X86_CR3_PCID_KERN_VAR, %rax
 	movq	%rax, %cr3
 #endif
 	call	do_nmi
@@ -1558,7 +1561,10 @@ end_repeat_nmi:
 	/* %rax is saved above, so OK to clobber here */
 	movq	%cr3, %rax
 	pushq	%rax
-	andq	$(~KAISER_SHADOW_PGD_OFFSET), %rax
+	/* mask off "user" bit of pgd address and 12 PCID bits: */
+	andq	$(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
+	/* Add back kernel PCID and "no flush" bit */
+	orq	X86_CR3_PCID_KERN_VAR, %rax
 	movq	%rax, %cr3
 #endif
 
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -13,6 +13,7 @@
 #include <asm/irqflags.h>
 #include <asm/asm.h>
 #include <asm/smap.h>
+#include <asm/pgtable_types.h>
 #include <asm/kaiser.h>
 #include <linux/linkage.h>
 #include <linux/err.h>
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -189,6 +189,7 @@
 
 #define X86_FEATURE_CPB		( 7*32+ 2) /* AMD Core Performance Boost */
 #define X86_FEATURE_EPB		( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
+#define X86_FEATURE_INVPCID_SINGLE ( 7*32+ 4) /* Effectively INVPCID && CR4.PCIDE=1 */
 
 #define X86_FEATURE_HW_PSTATE	( 7*32+ 8) /* AMD HW-PState */
 #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
--- a/arch/x86/include/asm/kaiser.h
+++ b/arch/x86/include/asm/kaiser.h
@@ -1,5 +1,8 @@
 #ifndef _ASM_X86_KAISER_H
 #define _ASM_X86_KAISER_H
+
+#include <uapi/asm/processor-flags.h> /* For PCID constants */
+
 /*
  * This file includes the definitions for the KAISER feature.
  * KAISER is a counter measure against x86_64 side channel attacks on
@@ -21,13 +24,21 @@
 
 .macro _SWITCH_TO_KERNEL_CR3 reg
 movq %cr3, \reg
-andq $(~KAISER_SHADOW_PGD_OFFSET), \reg
+andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), \reg
+orq  X86_CR3_PCID_KERN_VAR, \reg
 movq \reg, %cr3
 .endm
 
 .macro _SWITCH_TO_USER_CR3 reg
 movq %cr3, \reg
-orq $(KAISER_SHADOW_PGD_OFFSET), \reg
+andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), \reg
+/*
+ * This can obviously be one instruction by putting the
+ * KAISER_SHADOW_PGD_OFFSET bit in the X86_CR3_PCID_USER_VAR.
+ * But, just leave it now for simplicity.
+ */
+orq  X86_CR3_PCID_USER_VAR, \reg
+orq  $(KAISER_SHADOW_PGD_OFFSET), \reg
 movq \reg, %cr3
 .endm
 
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -141,6 +141,32 @@
 			 _PAGE_SOFT_DIRTY)
 #define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
 
+/* The ASID is the lower 12 bits of CR3 */
+#define X86_CR3_PCID_ASID_MASK  (_AC((1<<12)-1,UL))
+
+/* Mask for all the PCID-related bits in CR3: */
+#define X86_CR3_PCID_MASK       (X86_CR3_PCID_NOFLUSH | X86_CR3_PCID_ASID_MASK)
+#if defined(CONFIG_KAISER) && defined(CONFIG_X86_64)
+#define X86_CR3_PCID_ASID_KERN  (_AC(0x4,UL))
+#define X86_CR3_PCID_ASID_USER  (_AC(0x6,UL))
+
+#define X86_CR3_PCID_KERN_FLUSH		(X86_CR3_PCID_ASID_KERN)
+#define X86_CR3_PCID_USER_FLUSH		(X86_CR3_PCID_ASID_USER)
+#define X86_CR3_PCID_KERN_NOFLUSH	(X86_CR3_PCID_NOFLUSH | X86_CR3_PCID_ASID_KERN)
+#define X86_CR3_PCID_USER_NOFLUSH	(X86_CR3_PCID_NOFLUSH | X86_CR3_PCID_ASID_USER)
+#else
+#define X86_CR3_PCID_ASID_KERN  (_AC(0x0,UL))
+#define X86_CR3_PCID_ASID_USER  (_AC(0x0,UL))
+/*
+ * PCIDs are unsupported on 32-bit and none of these bits can be
+ * set in CR3:
+ */
+#define X86_CR3_PCID_KERN_FLUSH		(0)
+#define X86_CR3_PCID_USER_FLUSH		(0)
+#define X86_CR3_PCID_KERN_NOFLUSH	(0)
+#define X86_CR3_PCID_USER_NOFLUSH	(0)
+#endif
+
 /*
  * The cache modes defined here are used to translate between pure SW usage
  * and the HW defined cache mode bits and/or PAT entries.
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -13,7 +13,6 @@ static inline void __invpcid(unsigned lo
 			     unsigned long type)
 {
 	struct { u64 d[2]; } desc = { { pcid, addr } };
-
 	/*
 	 * The memory clobber is because the whole point is to invalidate
 	 * stale TLB entries and, especially if we're flushing global
@@ -134,14 +133,25 @@ static inline void cr4_set_bits_and_upda
 
 static inline void __native_flush_tlb(void)
 {
+	if (!cpu_feature_enabled(X86_FEATURE_INVPCID)) {
+		/*
+		 * If current->mm == NULL then we borrow a mm which may change during a
+		 * task switch and therefore we must not be preempted while we write CR3
+		 * back:
+		 */
+		preempt_disable();
+		native_write_cr3(native_read_cr3());
+		preempt_enable();
+		return;
+	}
 	/*
-	 * If current->mm == NULL then we borrow a mm which may change during a
-	 * task switch and therefore we must not be preempted while we write CR3
-	 * back:
-	 */
-	preempt_disable();
-	native_write_cr3(native_read_cr3());
-	preempt_enable();
+	 * We are no longer using globals with KAISER, so a
+	 * "nonglobals" flush would work too. But, this is more
+	 * conservative.
+	 *
+	 * Note, this works with CR4.PCIDE=0 or 1.
+	 */
+	invpcid_flush_all();
 }
 
 static inline void __native_flush_tlb_global_irq_disabled(void)
@@ -163,6 +173,8 @@ static inline void __native_flush_tlb_gl
 		/*
 		 * Using INVPCID is considerably faster than a pair of writes
 		 * to CR4 sandwiched inside an IRQ flag save/restore.
+		 *
+		 * Note, this works with CR4.PCIDE=0 or 1.
 		 */
 		invpcid_flush_all();
 		return;
@@ -182,7 +194,31 @@ static inline void __native_flush_tlb_gl
 
 static inline void __native_flush_tlb_single(unsigned long addr)
 {
-	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+	/*
+	 * SIMICS #GP's if you run INVPCID with type 2/3
+	 * and X86_CR4_PCIDE clear.  Shame!
+	 *
+	 * The ASIDs used below are hard-coded.  But, we must not
+	 * call invpcid(type=1/2) before CR4.PCIDE=1.  Just call
+	 * invpcid in the case we are called early.
+	 */
+	if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) {
+		asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+		return;
+	}
+	/* Flush the address out of both PCIDs. */
+	/*
+	 * An optimization here might be to determine addresses
+	 * that are only kernel-mapped and only flush the kernel
+	 * ASID.  But, userspace flushes are probably much more
+	 * important performance-wise.
+	 *
+	 * Make sure to do only a single invpcid when KAISER is
+	 * disabled and we have only a single ASID.
+	 */
+	if (X86_CR3_PCID_ASID_KERN != X86_CR3_PCID_ASID_USER)
+		invpcid_flush_one(X86_CR3_PCID_ASID_KERN, addr);
+	invpcid_flush_one(X86_CR3_PCID_ASID_USER, addr);
 }
 
 static inline void __flush_tlb_all(void)
--- a/arch/x86/include/uapi/asm/processor-flags.h
+++ b/arch/x86/include/uapi/asm/processor-flags.h
@@ -77,7 +77,8 @@
 #define X86_CR3_PWT		_BITUL(X86_CR3_PWT_BIT)
 #define X86_CR3_PCD_BIT		4 /* Page Cache Disable */
 #define X86_CR3_PCD		_BITUL(X86_CR3_PCD_BIT)
-#define X86_CR3_PCID_MASK	_AC(0x00000fff,UL) /* PCID Mask */
+#define X86_CR3_PCID_NOFLUSH_BIT 63 /* Preserve old PCID */
+#define X86_CR3_PCID_NOFLUSH    _BITULL(X86_CR3_PCID_NOFLUSH_BIT)
 
 /*
  * Intel CPU features in CR4
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -324,11 +324,45 @@ static __always_inline void setup_smap(s
 	}
 }
 
+/*
+ * These can have bit 63 set, so we can not just use a plain "or"
+ * instruction to get their value or'd into CR3.  It would take
+ * another register.  So, we use a memory reference to these
+ * instead.
+ *
+ * This is also handy because systems that do not support
+ * PCIDs just end up or'ing a 0 into their CR3, which does
+ * no harm.
+ */
+__aligned(PAGE_SIZE) unsigned long X86_CR3_PCID_KERN_VAR = 0;
+__aligned(PAGE_SIZE) unsigned long X86_CR3_PCID_USER_VAR = 0;
+
 static void setup_pcid(struct cpuinfo_x86 *c)
 {
 	if (cpu_has(c, X86_FEATURE_PCID)) {
 		if (cpu_has(c, X86_FEATURE_PGE)) {
 			cr4_set_bits(X86_CR4_PCIDE);
+			/*
+			 * These variables are used by the entry/exit
+			 * code to change PCIDs.
+			 */
+#ifdef CONFIG_KAISER
+			X86_CR3_PCID_KERN_VAR = X86_CR3_PCID_KERN_NOFLUSH;
+			X86_CR3_PCID_USER_VAR = X86_CR3_PCID_USER_NOFLUSH;
+#endif
+			/*
+			 * INVPCID has two "groups" of types:
+			 * 1/2: Invalidate an individual address
+			 * 3/4: Invalidate all contexts
+			 *
+			 * 1/2 take a PCID, but 3/4 do not.  So, 3/4
+			 * ignore the PCID argument in the descriptor.
+			 * But, we have to be careful not to call 1/2
+			 * with an actual non-zero PCID in them before
+			 * we do the above cr4_set_bits().
+			 */
+			if (cpu_has(c, X86_FEATURE_INVPCID))
+				set_cpu_cap(c, X86_FEATURE_INVPCID_SINGLE);
 		} else {
 			/*
 			 * flush_tlb_all(), as currently implemented, won't
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -773,7 +773,8 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, u
 			return 1;
 
 		/* PCID can not be enabled when cr3[11:0]!=000H or EFER.LMA=0 */
-		if ((kvm_read_cr3(vcpu) & X86_CR3_PCID_MASK) || !is_long_mode(vcpu))
+		if ((kvm_read_cr3(vcpu) & X86_CR3_PCID_ASID_MASK) ||
+		    !is_long_mode(vcpu))
 			return 1;
 	}
 
--- a/arch/x86/mm/kaiser.c
+++ b/arch/x86/mm/kaiser.c
@@ -239,6 +239,8 @@ static void __init kaiser_init_all_pgds(
 } while (0)
 
 extern char __per_cpu_user_mapped_start[], __per_cpu_user_mapped_end[];
+extern unsigned long X86_CR3_PCID_KERN_VAR;
+extern unsigned long X86_CR3_PCID_USER_VAR;
 /*
  * If anything in here fails, we will likely die on one of the
  * first kernel->user transitions and init will die.  But, we
@@ -289,6 +291,11 @@ void __init kaiser_init(void)
 	kaiser_add_user_map_early(&debug_idt_table,
 				  sizeof(gate_desc) * NR_VECTORS,
 				  __PAGE_KERNEL);
+
+	kaiser_add_user_map_early(&X86_CR3_PCID_KERN_VAR, PAGE_SIZE,
+				  __PAGE_KERNEL);
+	kaiser_add_user_map_early(&X86_CR3_PCID_USER_VAR, PAGE_SIZE,
+				  __PAGE_KERNEL);
 }
 
 /* Add a mapping to the shadow mapping, and synchronize the mappings */
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -34,6 +34,46 @@ struct flush_tlb_info {
 	unsigned long flush_end;
 };
 
+static void load_new_mm_cr3(pgd_t *pgdir)
+{
+	unsigned long new_mm_cr3 = __pa(pgdir);
+
+	/*
+	 * KAISER, plus PCIDs needs some extra work here.  But,
+	 * if either of features is not present, we need no
+	 * PCIDs here and just do a normal, full TLB flush with
+	 * the write_cr3()
+	 */
+	if (!IS_ENABLED(CONFIG_KAISER) ||
+	    !cpu_feature_enabled(X86_FEATURE_PCID))
+		goto out_set_cr3;
+	/*
+	 * We reuse the same PCID for different tasks, so we must
+	 * flush all the entires for the PCID out when we change
+	 * tasks.
+	 */
+	new_mm_cr3 = X86_CR3_PCID_KERN_FLUSH | __pa(pgdir);
+
+	/*
+	 * The flush from load_cr3() may leave old TLB entries
+	 * for userspace in place.  We must flush that context
+	 * separately.  We can theoretically delay doing this
+	 * until we actually load up the userspace CR3, but
+	 * that's a bit tricky.  We have to have the "need to
+	 * flush userspace PCID" bit per-cpu and check it in the
+	 * exit-to-userspace paths.
+	 */
+	invpcid_flush_single_context(X86_CR3_PCID_ASID_USER);
+
+out_set_cr3:
+	/*
+	 * Caution: many callers of this function expect
+	 * that load_cr3() is serializing and orders TLB
+	 * fills with respect to the mm_cpumask writes.
+	 */
+	write_cr3(new_mm_cr3);
+}
+
 /*
  * We cannot call mmdrop() because we are in interrupt context,
  * instead update mm->cpu_vm_mask.
@@ -45,7 +85,7 @@ void leave_mm(int cpu)
 		BUG();
 	if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
 		cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
-		load_cr3(swapper_pg_dir);
+		load_new_mm_cr3(swapper_pg_dir);
 		/*
 		 * This gets called in the idle path where RCU
 		 * functions differently.  Tracing normally
@@ -120,7 +160,7 @@ void switch_mm_irqs_off(struct mm_struct
 		 * ordering guarantee we need.
 		 *
 		 */
-		load_cr3(next->pgd);
+		load_new_mm_cr3(next->pgd);
 
 		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
 
@@ -167,7 +207,7 @@ void switch_mm_irqs_off(struct mm_struct
 			 * As above, load_cr3() is serializing and orders TLB
 			 * fills with respect to the mm_cpumask write.
 			 */
-			load_cr3(next->pgd);
+			load_new_mm_cr3(next->pgd);
 			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
 			load_mm_cr4(next);
 			load_mm_ldt(next);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]