[PATCH v2 03/49] usb: dwc2: Remove version check in GSNPSID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Gevorg Sahakyan <sahakyan@xxxxxxxxxxxx>

Only check the ID portion of the GSNPSID register and don’t check
the version. This will allow the driver to work with version 4.00a
and later of the DWC_hsotg IP.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Gevorg Sahakyan <sahakyan@xxxxxxxxxxxx>
Signed-off-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
Signed-off-by: Grigor Tovmasyan <tovmasya@xxxxxxxxxxxx>
---
 drivers/usb/dwc2/core.h   |  5 +++++
 drivers/usb/dwc2/hw.h     |  1 +
 drivers/usb/dwc2/params.c | 11 +++++------
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 0f0c21cf0192..7439aa6e35f6 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -951,6 +951,11 @@ struct dwc2_hsotg {
 #define DWC2_FS_IOT_REV_1_00a	0x5531100a
 #define DWC2_HS_IOT_REV_1_00a	0x5532100a
 
+	/* DWC OTG HW Core ID */
+#define DWC2_OTG_ID		0x4f540000
+#define DWC2_FS_IOT_ID		0x55310000
+#define DWC2_HS_IOT_ID		0x55320000
+
 #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
 	union dwc2_hcd_internal_flags {
 		u32 d32;
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 2c906d8ee465..43a3fb00f14f 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -231,6 +231,7 @@
 #define GUID				HSOTG_REG(0x003c)
 #define GSNPSID				HSOTG_REG(0x0040)
 #define GHWCFG1				HSOTG_REG(0x0044)
+#define GSNPSID_ID_MASK			GENMASK(31, 16)
 
 #define GHWCFG2				HSOTG_REG(0x0048)
 #define GHWCFG2_OTG_ENABLE_IC_USB		BIT(31)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 9c3ff66a2eb8..fc4d93d78ec3 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -630,14 +630,13 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 	/*
 	 * Attempt to ensure this device is really a DWC_otg Controller.
 	 * Read and verify the GSNPSID register contents. The value should be
-	 * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3",
-	 * as in "OTG version 2.xx" or "OTG version 3.xx".
+	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
 	 */
+
 	hw->snpsid = dwc2_readl(hsotg->regs + GSNPSID);
-	if ((hw->snpsid & 0xfffff000) != 0x4f542000 &&
-	    (hw->snpsid & 0xfffff000) != 0x4f543000 &&
-	    (hw->snpsid & 0xffff0000) != 0x55310000 &&
-	    (hw->snpsid & 0xffff0000) != 0x55320000) {
+	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
 		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
 			hw->snpsid);
 		return -ENODEV;
-- 
2.11.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]