Patch "x86/mm, sched/core: Uninline switch_mm()" has been added to the 4.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    x86/mm, sched/core: Uninline switch_mm()

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     x86-mm-sched-core-uninline-switch_mm.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 69c0319aabba45bcf33178916a2f06967b4adede Mon Sep 17 00:00:00 2001
From: Andy Lutomirski <luto@xxxxxxxxxx>
Date: Tue, 26 Apr 2016 09:39:08 -0700
Subject: x86/mm, sched/core: Uninline switch_mm()

From: Andy Lutomirski <luto@xxxxxxxxxx>

commit 69c0319aabba45bcf33178916a2f06967b4adede upstream.

It's fairly large and it has quite a few callers.  This may also
help untangle some headers down the road.

Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxx>
Reviewed-by: Borislav Petkov <bp@xxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/54f3367803e7f80b2be62c8a21879aa74b1a5f57.1461688545.git.luto@xxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/x86/include/asm/mmu_context.h |   98 -----------------------------------
 arch/x86/mm/tlb.c                  |  102 +++++++++++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+), 96 deletions(-)

--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -104,103 +104,9 @@ static inline void enter_lazy_tlb(struct
 #endif
 }
 
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned cpu = smp_processor_id();
+extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+		      struct task_struct *tsk);
 
-	if (likely(prev != next)) {
-#ifdef CONFIG_SMP
-		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		this_cpu_write(cpu_tlbstate.active_mm, next);
-#endif
-		cpumask_set_cpu(cpu, mm_cpumask(next));
-
-		/*
-		 * Re-load page tables.
-		 *
-		 * This logic has an ordering constraint:
-		 *
-		 *  CPU 0: Write to a PTE for 'next'
-		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
-		 *  CPU 1: set bit 1 in next's mm_cpumask
-		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
-		 *
-		 * We need to prevent an outcome in which CPU 1 observes
-		 * the new PTE value and CPU 0 observes bit 1 clear in
-		 * mm_cpumask.  (If that occurs, then the IPI will never
-		 * be sent, and CPU 0's TLB will contain a stale entry.)
-		 *
-		 * The bad outcome can occur if either CPU's load is
-		 * reordered before that CPU's store, so both CPUs must
-		 * execute full barriers to prevent this from happening.
-		 *
-		 * Thus, switch_mm needs a full barrier between the
-		 * store to mm_cpumask and any operation that could load
-		 * from next->pgd.  TLB fills are special and can happen
-		 * due to instruction fetches or for no reason at all,
-		 * and neither LOCK nor MFENCE orders them.
-		 * Fortunately, load_cr3() is serializing and gives the
-		 * ordering guarantee we need.
-		 *
-		 */
-		load_cr3(next->pgd);
-
-		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
-
-		/* Stop flush ipis for the previous mm */
-		cpumask_clear_cpu(cpu, mm_cpumask(prev));
-
-		/* Load per-mm CR4 state */
-		load_mm_cr4(next);
-
-#ifdef CONFIG_MODIFY_LDT_SYSCALL
-		/*
-		 * Load the LDT, if the LDT is different.
-		 *
-		 * It's possible that prev->context.ldt doesn't match
-		 * the LDT register.  This can happen if leave_mm(prev)
-		 * was called and then modify_ldt changed
-		 * prev->context.ldt but suppressed an IPI to this CPU.
-		 * In this case, prev->context.ldt != NULL, because we
-		 * never set context.ldt to NULL while the mm still
-		 * exists.  That means that next->context.ldt !=
-		 * prev->context.ldt, because mms never share an LDT.
-		 */
-		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_mm_ldt(next);
-#endif
-	}
-#ifdef CONFIG_SMP
-	  else {
-		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
-
-		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
-			/*
-			 * On established mms, the mm_cpumask is only changed
-			 * from irq context, from ptep_clear_flush() while in
-			 * lazy tlb mode, and here. Irqs are blocked during
-			 * schedule, protecting us from simultaneous changes.
-			 */
-			cpumask_set_cpu(cpu, mm_cpumask(next));
-
-			/*
-			 * We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload CR3
-			 * to make sure to use no freed page tables.
-			 *
-			 * As above, load_cr3() is serializing and orders TLB
-			 * fills with respect to the mm_cpumask write.
-			 */
-			load_cr3(next->pgd);
-			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
-			load_mm_cr4(next);
-			load_mm_ldt(next);
-		}
-	}
-#endif
-}
 
 #define activate_mm(prev, next)			\
 do {						\
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -59,6 +59,108 @@ void leave_mm(int cpu)
 }
 EXPORT_SYMBOL_GPL(leave_mm);
 
+#endif /* CONFIG_SMP */
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	       struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+#ifdef CONFIG_SMP
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		this_cpu_write(cpu_tlbstate.active_mm, next);
+#endif
+		cpumask_set_cpu(cpu, mm_cpumask(next));
+
+		/*
+		 * Re-load page tables.
+		 *
+		 * This logic has an ordering constraint:
+		 *
+		 *  CPU 0: Write to a PTE for 'next'
+		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
+		 *  CPU 1: set bit 1 in next's mm_cpumask
+		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
+		 *
+		 * We need to prevent an outcome in which CPU 1 observes
+		 * the new PTE value and CPU 0 observes bit 1 clear in
+		 * mm_cpumask.  (If that occurs, then the IPI will never
+		 * be sent, and CPU 0's TLB will contain a stale entry.)
+		 *
+		 * The bad outcome can occur if either CPU's load is
+		 * reordered before that CPU's store, so both CPUs must
+		 * execute full barriers to prevent this from happening.
+		 *
+		 * Thus, switch_mm needs a full barrier between the
+		 * store to mm_cpumask and any operation that could load
+		 * from next->pgd.  TLB fills are special and can happen
+		 * due to instruction fetches or for no reason at all,
+		 * and neither LOCK nor MFENCE orders them.
+		 * Fortunately, load_cr3() is serializing and gives the
+		 * ordering guarantee we need.
+		 *
+		 */
+		load_cr3(next->pgd);
+
+		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+
+		/* Stop flush ipis for the previous mm */
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
+		/* Load per-mm CR4 state */
+		load_mm_cr4(next);
+
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+		/*
+		 * Load the LDT, if the LDT is different.
+		 *
+		 * It's possible that prev->context.ldt doesn't match
+		 * the LDT register.  This can happen if leave_mm(prev)
+		 * was called and then modify_ldt changed
+		 * prev->context.ldt but suppressed an IPI to this CPU.
+		 * In this case, prev->context.ldt != NULL, because we
+		 * never set context.ldt to NULL while the mm still
+		 * exists.  That means that next->context.ldt !=
+		 * prev->context.ldt, because mms never share an LDT.
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_mm_ldt(next);
+#endif
+	}
+#ifdef CONFIG_SMP
+	  else {
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
+
+		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
+			/*
+			 * On established mms, the mm_cpumask is only changed
+			 * from irq context, from ptep_clear_flush() while in
+			 * lazy tlb mode, and here. Irqs are blocked during
+			 * schedule, protecting us from simultaneous changes.
+			 */
+			cpumask_set_cpu(cpu, mm_cpumask(next));
+
+			/*
+			 * We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 *
+			 * As above, load_cr3() is serializing and orders TLB
+			 * fills with respect to the mm_cpumask write.
+			 */
+			load_cr3(next->pgd);
+			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+			load_mm_cr4(next);
+			load_mm_ldt(next);
+		}
+	}
+#endif
+}
+
+#ifdef CONFIG_SMP
+
 /*
  * The flush IPI assumes that a thread switch happens in this order:
  * [cpu0: the cpu that switches]


Patches currently in stable-queue which might be from luto@xxxxxxxxxx are

queue-4.4/x86-mm-sched-core-uninline-switch_mm.patch
queue-4.4/x86-mm-add-a-noinvpcid-boot-option-to-turn-off-invpcid.patch
queue-4.4/x86-irq-do-not-substract-irq_tlb_count-from-irq_call_count.patch
queue-4.4/x86-mm-if-invpcid-is-available-use-it-to-flush-global-mappings.patch
queue-4.4/x86-mm-add-invpcid-helpers.patch
queue-4.4/sched-core-add-switch_mm_irqs_off-and-use-it-in-the-scheduler.patch
queue-4.4/arm-hide-finish_arch_post_lock_switch-from-modules.patch
queue-4.4/x86-mm-sched-core-turn-off-irqs-in-switch_mm.patch
queue-4.4/mm-mmu_context-sched-core-fix-mmu_context.h-assumption.patch
queue-4.4/x86-mm-build-arch-x86-mm-tlb.c-even-on-smp.patch
queue-4.4/sched-core-idle_task_exit-shouldn-t-use-switch_mm_irqs_off.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]