4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sara Sharon <sara.sharon@xxxxxxxxx>
[ Upstream commit 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ]
When a station is asleep, the fw will set it as "asleep".
All queues that are used only by one station will be stopped by
the fw.
In pre-DQA mode this was relevant for aggregation queues. However,
in DQA mode a queue is owned by one station only, so all queues
will be stopped.
As a result, we don't expect to get filtered frames back to
mac80211 and don't have to maintain the entire pending_frames
state logic, the same way as we do in aggregations.
The correct behavior is to align DQA behavior with the aggregation
queue behaviour pre-DQA:
- Don't count pending frames.
- Let mac80211 know we have frames in these queues so that it can
properly handle trigger frames.
When a trigger frame is received, mac80211 tells the driver to send
frames from the queues using release_buffered_frames.
The driver will tell the fw to let frames out even if the station
is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count.
Reported-and-tested-by: Jens Axboe <axboe@xxxxxxxxx>
Reported-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sara Sharon <sara.sharon@xxxxxxxxx>
Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +-
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 11 +++--
drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 -
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 41 +++++++++-------------
4 files changed, 28 insertions(+), 31 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -2320,7 +2320,7 @@ iwl_mvm_mac_release_buffered_frames(stru
{
struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
- /* Called when we need to transmit (a) frame(s) from agg queue */
+ /* Called when we need to transmit (a) frame(s) from agg or dqa queue */
iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames,
tids, more_data, true);
@@ -2340,7 +2340,8 @@ static void iwl_mvm_mac_sta_notify(struc
for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) {
struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
- if (tid_data->state != IWL_AGG_ON &&
+ if (!iwl_mvm_is_dqa_supported(mvm) &&
+ tid_data->state != IWL_AGG_ON &&
tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA)
continue;
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -3032,7 +3032,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
struct ieee80211_sta *sta,
enum ieee80211_frame_release_type reason,
u16 cnt, u16 tids, bool more_data,
- bool agg)
+ bool single_sta_queue)
{
struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
struct iwl_mvm_add_sta_cmd cmd = {
@@ -3052,14 +3052,14 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT)
cmd.awake_acs |= BIT(tid_to_ucode_ac[tid]);
- /* If we're releasing frames from aggregation queues then check if the
- * all queues combined that we're releasing frames from have
+ /* If we're releasing frames from aggregation or dqa queues then check
+ * if all the queues that we're releasing frames from, combined, have:
* - more frames than the service period, in which case more_data
* needs to be set
* - fewer than 'cnt' frames, in which case we need to adjust the
* firmware command (but do that unconditionally)
*/
- if (agg) {
+ if (single_sta_queue) {
int remaining = cnt;
int sleep_tx_count;
@@ -3069,7 +3069,8 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
u16 n_queued;
tid_data = &mvmsta->tid_data[tid];
- if (WARN(tid_data->state != IWL_AGG_ON &&
+ if (WARN(!iwl_mvm_is_dqa_supported(mvm) &&
+ tid_data->state != IWL_AGG_ON &&
tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA,
"TID %d state is %d\n",
tid, tid_data->state)) {
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
@@ -545,7 +545,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
struct ieee80211_sta *sta,
enum ieee80211_frame_release_type reason,
u16 cnt, u16 tids, bool more_data,
- bool agg);
+ bool single_sta_queue);
int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
bool drain);
void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm,
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -7,7 +7,7 @@
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * Copyright(c) 2016 Intel Deutschland GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -34,6 +34,7 @@
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -621,8 +622,10 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mv
* values.
* Note that we don't need to make sure it isn't agg'd, since we're
* TXing non-sta
+ * For DQA mode - we shouldn't increase it though
*/
- atomic_inc(&mvm->pending_frames[sta_id]);
+ if (!iwl_mvm_is_dqa_supported(mvm))
+ atomic_inc(&mvm->pending_frames[sta_id]);
return 0;
}
@@ -1009,11 +1012,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mv
spin_unlock(&mvmsta->lock);
- /* Increase pending frames count if this isn't AMPDU */
- if ((iwl_mvm_is_dqa_supported(mvm) &&
- mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_ON &&
- mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_STARTING) ||
- (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu))
+ /* Increase pending frames count if this isn't AMPDU or DQA queue */
+ if (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu)
atomic_inc(&mvm->pending_frames[mvmsta->sta_id]);
return 0;
@@ -1083,12 +1083,13 @@ static void iwl_mvm_check_ratid_empty(st
lockdep_assert_held(&mvmsta->lock);
if ((tid_data->state == IWL_AGG_ON ||
- tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA) &&
+ tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA ||
+ iwl_mvm_is_dqa_supported(mvm)) &&
iwl_mvm_tid_queued(tid_data) == 0) {
/*
- * Now that this aggregation queue is empty tell mac80211 so it
- * knows we no longer have frames buffered for the station on
- * this TID (for the TIM bitmap calculation.)
+ * Now that this aggregation or DQA queue is empty tell
+ * mac80211 so it knows we no longer have frames buffered for
+ * the station on this TID (for the TIM bitmap calculation.)
*/
ieee80211_sta_set_buffered(sta, tid, false);
}
@@ -1261,7 +1262,6 @@ static void iwl_mvm_rx_tx_cmd_single(str
u8 skb_freed = 0;
u16 next_reclaimed, seq_ctl;
bool is_ndp = false;
- bool txq_agg = false; /* Is this TXQ aggregated */
__skb_queue_head_init(&skbs);
@@ -1287,6 +1287,10 @@ static void iwl_mvm_rx_tx_cmd_single(str
info->flags |= IEEE80211_TX_STAT_ACK;
break;
case TX_STATUS_FAIL_DEST_PS:
+ /* In DQA, the FW should have stopped the queue and not
+ * return this status
+ */
+ WARN_ON(iwl_mvm_is_dqa_supported(mvm));
info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
break;
default:
@@ -1391,15 +1395,6 @@ static void iwl_mvm_rx_tx_cmd_single(str
bool send_eosp_ndp = false;
spin_lock_bh(&mvmsta->lock);
- if (iwl_mvm_is_dqa_supported(mvm)) {
- enum iwl_mvm_agg_state state;
-
- state = mvmsta->tid_data[tid].state;
- txq_agg = (state == IWL_AGG_ON ||
- state == IWL_EMPTYING_HW_QUEUE_DELBA);
- } else {
- txq_agg = txq_id >= mvm->first_agg_queue;
- }
if (!is_ndp) {
tid_data->next_reclaimed = next_reclaimed;
@@ -1456,11 +1451,11 @@ static void iwl_mvm_rx_tx_cmd_single(str
* If the txq is not an AMPDU queue, there is no chance we freed
* several skbs. Check that out...
*/
- if (txq_agg)
+ if (iwl_mvm_is_dqa_supported(mvm) || txq_id >= mvm->first_agg_queue)
goto out;
/* We can't free more than one frame at once on a shared queue */
- WARN_ON(!iwl_mvm_is_dqa_supported(mvm) && (skb_freed > 1));
+ WARN_ON(skb_freed > 1);
/* If we have still frames for this STA nothing to do here */
if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id]))