This is a note to let you know that I've just added the patch titled
bnx2x: fix detection of VLAN filtering feature for VF
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
bnx2x-fix-detection-of-vlan-filtering-feature-for-vf.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From foo@baz Tue Dec 12 13:26:17 CET 2017
From: Michal Schmidt <mschmidt@xxxxxxxxxx>
Date: Fri, 3 Mar 2017 17:08:31 +0100
Subject: bnx2x: fix detection of VLAN filtering feature for VF
From: Michal Schmidt <mschmidt@xxxxxxxxxx>
[ Upstream commit 83bd9eb8fc69cdd5135ed6e1f066adc8841800fd ]
VFs are currently missing the VLAN filtering feature, because we were
checking the PF's acquire response before actually performing the acquire.
Fix it by setting the feature flag later when we have the PF response.
Signed-off-by: Michal Schmidt <mschmidt@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13293,17 +13293,15 @@ static int bnx2x_init_dev(struct bnx2x *
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
- /* VF with OLD Hypervisor or old PF do not support filtering */
if (IS_PF(bp)) {
if (chip_is_e1x)
bp->accept_any_vlan = true;
else
dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-#ifdef CONFIG_BNX2X_SRIOV
- } else if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) {
- dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-#endif
}
+ /* For VF we'll know whether to enable VLAN filtering after
+ * getting a response to CHANNEL_TLV_ACQUIRE from PF.
+ */
dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
dev->features |= NETIF_F_HIGHDMA;
@@ -14006,6 +14004,14 @@ static int bnx2x_init_one(struct pci_dev
rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count);
if (rc)
goto init_one_freemem;
+
+#ifdef CONFIG_BNX2X_SRIOV
+ /* VF with OLD Hypervisor or old PF do not support filtering */
+ if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) {
+ dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ }
+#endif
}
/* Enable SRIOV if capability found in configuration space */
Patches currently in stable-queue which might be from mschmidt@xxxxxxxxxx are
queue-4.9/bnx2x-fix-detection-of-vlan-filtering-feature-for-vf.patch
queue-4.9/bnx2x-fix-possible-overrun-of-vfpf-multicast-addresses-array.patch
queue-4.9/bnx2x-do-not-rollback-vf-mac-vlan-filters-we-did-not-configure.patch
queue-4.9/bnx2x-prevent-crash-when-accessing-ptp-with-interface-down.patch