From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
[ Upstream commit fd567653bdb908009b650f079bfd4b63169e2ac4 ]
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/usb/phy/phy-isp1301.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 8a55b37d1a02..d2ed59a38354 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -32,6 +32,12 @@ static const struct i2c_device_id isp1301_id[] = {
{ }
};
+static const struct of_device_id isp1301_of_match[] = {
+ {.compatible = "nxp,isp1301" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
static struct i2c_client *isp1301_i2c_client;
static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -129,6 +135,7 @@ static int isp1301_remove(struct i2c_client *client)
static struct i2c_driver isp1301_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = of_match_ptr(isp1301_of_match),
},
.probe = isp1301_probe,
.remove = isp1301_remove,
--
2.11.0
