From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[ Upstream commit bb7da333d0a9f3bddc08f84187b7579a3f68fd24 ]
Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 8860e74aa28f..fae1a1ff53ab 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1061,13 +1061,12 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
* (including FCS and tag) because the length verification is done after
* the Broadcom tag is stripped off the ingress packet.
*/
- if (skb_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
+ if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
ret = NETDEV_TX_OK;
goto out;
}
- skb_len = skb->len < ETH_ZLEN + ENET_BRCM_TAG_LEN ?
- ETH_ZLEN + ENET_BRCM_TAG_LEN : skb->len;
+ skb_len = skb->len;
mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
if (dma_mapping_error(kdev, mapping)) {
--
2.11.0