3.16.51-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Ted Mielczarek <ted@xxxxxxxxxxxxxx>
commit 1a48ff81b3912be5fadae3fafde6c2f632246a4c upstream.
Xbox One controllers require an initialization message to start sending
data, so xpad_init_output becomes a required function. The Xbox One
controller does not have LEDs like the Xbox 360 controller, so that
functionality is not implemented. The format of messages controlling rumble
is currently undocumented, so rumble support is not yet implemented.
Note that Xbox One controller advertises three interfaces with the same
interface class, subclass and protocol, so we have to also match against
interface number.
Signed-off-by: Ted Mielczarek <ted@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/input/joystick/xpad.c | 174 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 157 insertions(+), 17 deletions(-)
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -95,7 +95,8 @@
#define XTYPE_XBOX 0
#define XTYPE_XBOX360 1
#define XTYPE_XBOX360W 2
-#define XTYPE_UNKNOWN 3
+#define XTYPE_XBOXONE 3
+#define XTYPE_UNKNOWN 4
static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
@@ -121,6 +122,7 @@ static const struct xpad_device {
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+ { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -263,10 +265,12 @@ static const signed short xpad_abs_trigg
-1
};
-/* Xbox 360 has a vendor-specific class, so we cannot match it with only
+/*
+ * Xbox 360 has a vendor-specific class, so we cannot match it with only
* USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
* match against vendor id as well. Wired Xbox 360 devices have protocol 1,
- * wireless controllers have protocol 129. */
+ * wireless controllers have protocol 129.
+ */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
.idVendor = (vend), \
@@ -277,9 +281,20 @@ static const signed short xpad_abs_trigg
{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+/* The Xbox One controller uses subclass 71 and protocol 208. */
+#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
+ .idVendor = (vend), \
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
+ .bInterfaceSubClass = 71, \
+ .bInterfaceProtocol = (pr)
+#define XPAD_XBOXONE_VENDOR(vend) \
+ { XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+
static struct usb_device_id xpad_table[] = {
{ USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
+ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
@@ -313,12 +328,10 @@ struct usb_xpad {
struct urb *bulk_out;
unsigned char *bdata;
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct urb *irq_out; /* urb for interrupt out report */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
struct mutex odata_mutex;
-#endif
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct xpad_led *led;
@@ -509,6 +522,105 @@ static void xpad360w_process_packet(stru
xpad360_process_packet(xpad, cmd, &data[4]);
}
+/*
+ * xpadone_process_buttons
+ *
+ * Process a button update packet from an Xbox one controller.
+ */
+static void xpadone_process_buttons(struct usb_xpad *xpad,
+ struct input_dev *dev,
+ unsigned char *data)
+{
+ /* menu/view buttons */
+ input_report_key(dev, BTN_START, data[4] & 0x04);
+ input_report_key(dev, BTN_SELECT, data[4] & 0x08);
+
+ /* buttons A,B,X,Y */
+ input_report_key(dev, BTN_A, data[4] & 0x10);
+ input_report_key(dev, BTN_B, data[4] & 0x20);
+ input_report_key(dev, BTN_X, data[4] & 0x40);
+ input_report_key(dev, BTN_Y, data[4] & 0x80);
+
+ /* digital pad */
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ /* dpad as buttons (left, right, up, down) */
+ input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & 0x04);
+ input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & 0x08);
+ input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & 0x02);
+ } else {
+ input_report_abs(dev, ABS_HAT0X,
+ !!(data[5] & 0x08) - !!(data[5] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y,
+ !!(data[5] & 0x02) - !!(data[5] & 0x01));
+ }
+
+ /* TL/TR */
+ input_report_key(dev, BTN_TL, data[5] & 0x10);
+ input_report_key(dev, BTN_TR, data[5] & 0x20);
+
+ /* stick press left/right */
+ input_report_key(dev, BTN_THUMBL, data[5] & 0x40);
+ input_report_key(dev, BTN_THUMBR, data[5] & 0x80);
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ /* left stick */
+ input_report_abs(dev, ABS_X,
+ (__s16) le16_to_cpup((__le16 *)(data + 10)));
+ input_report_abs(dev, ABS_Y,
+ ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+
+ /* right stick */
+ input_report_abs(dev, ABS_RX,
+ (__s16) le16_to_cpup((__le16 *)(data + 14)));
+ input_report_abs(dev, ABS_RY,
+ ~(__s16) le16_to_cpup((__le16 *)(data + 16)));
+ }
+
+ /* triggers left/right */
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ input_report_key(dev, BTN_TL2,
+ (__u16) le16_to_cpup((__le16 *)(data + 6)));
+ input_report_key(dev, BTN_TR2,
+ (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ } else {
+ input_report_abs(dev, ABS_Z,
+ (__u16) le16_to_cpup((__le16 *)(data + 6)));
+ input_report_abs(dev, ABS_RZ,
+ (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ }
+
+ input_sync(dev);
+}
+
+/*
+ * xpadone_process_packet
+ *
+ * Completes a request by converting the data into events for the
+ * input subsystem. This version is for the Xbox One controller.
+ *
+ * The report format was gleaned from
+ * https://github.com/kylelemons/xbox/blob/master/xbox.go
+ */
+
+static void xpadone_process_packet(struct usb_xpad *xpad,
+ u16 cmd, unsigned char *data)
+{
+ struct input_dev *dev = xpad->dev;
+
+ switch (data[0]) {
+ case 0x20:
+ xpadone_process_buttons(xpad, dev, data);
+ break;
+
+ case 0x07:
+ /* the xbox button has its own special report */
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ input_sync(dev);
+ break;
+ }
+}
+
static void xpad_irq_in(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -541,6 +653,9 @@ static void xpad_irq_in(struct urb *urb)
case XTYPE_XBOX360W:
xpad360w_process_packet(xpad, 0, xpad->idata);
break;
+ case XTYPE_XBOXONE:
+ xpadone_process_packet(xpad, 0, xpad->idata);
+ break;
default:
xpad_process_packet(xpad, 0, xpad->idata);
}
@@ -574,7 +689,6 @@ static void xpad_bulk_out(struct urb *ur
}
}
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
static void xpad_irq_out(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -612,6 +726,7 @@ exit:
static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
{
struct usb_endpoint_descriptor *ep_irq_out;
+ int ep_irq_out_idx;
int error;
if (xpad->xtype == XTYPE_UNKNOWN)
@@ -632,7 +747,10 @@ static int xpad_init_output(struct usb_i
goto fail2;
}
- ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
+ /* Xbox One controller has in/out endpoints swapped. */
+ ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
+ ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
+
usb_fill_int_urb(xpad->irq_out, xpad->udev,
usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
xpad->odata, XPAD_PKT_LEN,
@@ -660,11 +778,6 @@ static void xpad_deinit_output(struct us
xpad->odata, xpad->odata_dma);
}
}
-#else
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
-static void xpad_deinit_output(struct usb_xpad *xpad) {}
-static void xpad_stop_output(struct usb_xpad *xpad) {}
-#endif
#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
@@ -731,7 +844,7 @@ static int xpad_play_effect(struct input
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_UNKNOWN)
+ if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -840,6 +953,14 @@ static int xpad_open(struct input_dev *d
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
return -EIO;
+ if (xpad->xtype == XTYPE_XBOXONE) {
+ /* Xbox one controller needs to be initialized. */
+ xpad->odata[0] = 0x05;
+ xpad->odata[1] = 0x20;
+ xpad->irq_out->transfer_buffer_length = 2;
+ return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ }
+
return 0;
}
@@ -855,6 +976,7 @@ static void xpad_close(struct input_dev
static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
+ struct usb_xpad *xpad = input_get_drvdata(input_dev);
set_bit(abs, input_dev->absbit);
switch (abs) {
@@ -866,7 +988,10 @@ static void xpad_set_up_abs(struct input
break;
case ABS_Z:
case ABS_RZ: /* the triggers (if mapped to axes) */
- input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+ if (xpad->xtype == XTYPE_XBOXONE)
+ input_set_abs_params(input_dev, abs, 0, 1023, 0, 0);
+ else
+ input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
break;
case ABS_HAT0X:
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
@@ -881,6 +1006,7 @@ static int xpad_probe(struct usb_interfa
struct usb_xpad *xpad;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
+ int ep_irq_in_idx;
int i, error;
if (intf->cur_altsetting->desc.bNumEndpoints != 2)
@@ -892,6 +1018,16 @@ static int xpad_probe(struct usb_interfa
break;
}
+ if (xpad_device[i].xtype == XTYPE_XBOXONE &&
+ intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ /*
+ * The Xbox One controller lists three interfaces all with the
+ * same interface class, subclass and protocol. Differentiate by
+ * interface number.
+ */
+ return -ENODEV;
+ }
+
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!xpad || !input_dev) {
@@ -962,7 +1098,8 @@ static int xpad_probe(struct usb_interfa
__set_bit(xpad_common_btn[i], input_dev->keybit);
/* set up model-specific ones */
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+ xpad->xtype == XTYPE_XBOXONE) {
for (i = 0; xpad360_btn[i] >= 0; i++)
__set_bit(xpad360_btn[i], input_dev->keybit);
} else {
@@ -975,7 +1112,7 @@ static int xpad_probe(struct usb_interfa
__set_bit(xpad_btn_pad[i], input_dev->keybit);
} else {
for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
}
if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -998,7 +1135,10 @@ static int xpad_probe(struct usb_interfa
if (error)
goto fail5;
- ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
+ /* Xbox One controller has in/out endpoints swapped. */
+ ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
+ ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
xpad->idata, XPAD_PKT_LEN, xpad_irq_in,