3.16.51-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Nisar Sayed <Nisar.Sayed@xxxxxxxxxxxxx> commit 9c0827317f235865ae421293f8aecf6cb327a63e upstream. Configure pause time to 0xffff when tx flow control enabled Set pause time to 0xffff in the pause frame to indicate the partner to stop sending the packets. When RX buffer frees up, the device sends pause frame with pause time zero for partner to resume transmission. Fixes: 2f7ca802bdae ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@xxxxxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- drivers/net/usb/smsc95xx.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -516,7 +516,7 @@ static void smsc95xx_set_multicast(struc static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex, u16 lcladv, u16 rmtadv) { - u32 flow, afc_cfg = 0; + u32 flow = 0, afc_cfg; int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg); if (ret < 0) @@ -527,20 +527,19 @@ static int smsc95xx_phy_update_flowcontr if (cap & FLOW_CTRL_RX) flow = 0xFFFF0002; - else - flow = 0; - if (cap & FLOW_CTRL_TX) + if (cap & FLOW_CTRL_TX) { afc_cfg |= 0xF; - else + flow |= 0xFFFF0000; + } else { afc_cfg &= ~0xF; + } netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n", cap & FLOW_CTRL_RX ? "enabled" : "disabled", cap & FLOW_CTRL_TX ? "enabled" : "disabled"); } else { netif_dbg(dev, link, dev->net, "half duplex\n"); - flow = 0; afc_cfg |= 0xF; }