Patch "USB: serial: garmin_gps: fix I/O after failed probe and remove" has been added to the 4.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    USB: serial: garmin_gps: fix I/O after failed probe and remove

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-serial-garmin_gps-fix-i-o-after-failed-probe-and-remove.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 19a565d9af6e0d828bd0d521d3bafd5017f4ce52 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@xxxxxxxxxx>
Date: Wed, 11 Oct 2017 14:02:57 +0200
Subject: USB: serial: garmin_gps: fix I/O after failed probe and remove

From: Johan Hovold <johan@xxxxxxxxxx>

commit 19a565d9af6e0d828bd0d521d3bafd5017f4ce52 upstream.

Make sure to stop any submitted interrupt and bulk-out URBs before
returning after failed probe and when the port is being unbound to avoid
later NULL-pointer dereferences in the completion callbacks.

Also fix up the related and broken I/O cancellation on failed open and
on close. (Note that port->write_urb was never submitted.)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/serial/garmin_gps.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -138,6 +138,7 @@ struct garmin_data {
 	__u8   privpkt[4*6];
 	spinlock_t lock;
 	struct list_head pktlist;
+	struct usb_anchor write_urbs;
 };
 
 
@@ -906,7 +907,7 @@ static int garmin_init_session(struct us
 					sizeof(GARMIN_START_SESSION_REQ), 0);
 
 			if (status < 0)
-				break;
+				goto err_kill_urbs;
 		}
 
 		if (status > 0)
@@ -914,6 +915,12 @@ static int garmin_init_session(struct us
 	}
 
 	return status;
+
+err_kill_urbs:
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	return status;
 }
 
 
@@ -931,7 +938,6 @@ static int garmin_open(struct tty_struct
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	/* shutdown any bulk reads that might be going on */
-	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
 	if (garmin_data_p->state == STATE_RESET)
@@ -954,7 +960,7 @@ static void garmin_close(struct usb_seri
 
 	/* shutdown our urbs */
 	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->write_urb);
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
 
 	/* keep reset state so we know that we must start a new session */
 	if (garmin_data_p->state != STATE_RESET)
@@ -1038,12 +1044,14 @@ static int garmin_write_bulk(struct usb_
 	}
 
 	/* send it down the pipe */
+	usb_anchor_urb(urb, &garmin_data_p->write_urbs);
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		dev_err(&port->dev,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		usb_unanchor_urb(urb);
 		kfree(buffer);
 	}
 
@@ -1402,6 +1410,7 @@ static int garmin_port_probe(struct usb_
 	garmin_data_p->state = 0;
 	garmin_data_p->flags = 0;
 	garmin_data_p->count = 0;
+	init_usb_anchor(&garmin_data_p->write_urbs);
 	usb_set_serial_port_data(port, garmin_data_p);
 
 	status = garmin_init_session(port);
@@ -1414,6 +1423,7 @@ static int garmin_port_remove(struct usb
 {
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
 	kfree(garmin_data_p);


Patches currently in stable-queue which might be from johan@xxxxxxxxxx are

queue-4.4/usb-serial-qcserial-add-pid-vid-for-sierra-wireless-em7355-fw-update.patch
queue-4.4/usb-serial-garmin_gps-fix-i-o-after-failed-probe-and-remove.patch
queue-4.4/usb-serial-garmin_gps-fix-memory-leak-on-probe-errors.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]