From: Masashi Honma <masashi.honma@xxxxxxxxx>
[ Upstream commit 76f43b4c0a9337af22827d78de4f2b8fd5328489 ]
mesh_sync_offset_adjust_tbtt() implements Extensible synchronization
framework ([1] 13.13.2 Extensible synchronization framework). It shall
not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh
Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon
collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment
procedures for detail). So this patch remove the flag operations.
[1] IEEE Std 802.11 2012
Signed-off-by: Masashi Honma <masashi.honma@xxxxxxxxx>
[remove adjusting_tbtt entirely, since it's now unused]
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
net/mac80211/ieee80211_i.h | 1 -
net/mac80211/mesh.c | 3 ---
net/mac80211/mesh_sync.c | 11 -----------
3 files changed, 15 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6837a46ca4a2..7b271f3ded6b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -682,7 +682,6 @@ struct ieee80211_if_mesh {
const struct ieee80211_mesh_sync_ops *sync_ops;
s64 sync_offset_clockdrift_max;
spinlock_t sync_offset_lock;
- bool adjusting_tbtt;
/* mesh power save */
enum nl80211_mesh_power_mode nonpeer_pm;
int ps_peers_light_sleep;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9063e8e736ad..9e1ded80a992 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -295,8 +295,6 @@ int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
/* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
*pos |= ifmsh->ps_peers_deep_sleep ?
IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
- *pos++ |= ifmsh->adjusting_tbtt ?
- IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
*pos++ = 0x00;
return 0;
@@ -866,7 +864,6 @@ int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
ifmsh->mesh_cc_id = 0; /* Disabled */
/* register sync ops from extensible synchronization framework */
ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
- ifmsh->adjusting_tbtt = false;
ifmsh->sync_offset_clockdrift_max = 0;
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
ieee80211_mesh_root_setup(ifmsh);
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 64bc22ad9496..16ed43fe4841 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -119,7 +119,6 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
*/
if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
- clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
msync_dbg(sdata, "STA %pM : is adjusting TBTT\n",
sta->sta.addr);
goto no_sync;
@@ -168,11 +167,9 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata,
struct beacon_data *beacon)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
- u8 cap;
WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
WARN_ON(!rcu_read_lock_held());
- cap = beacon->meshconf->meshconf_cap;
spin_lock_bh(&ifmsh->sync_offset_lock);
@@ -186,21 +183,13 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata,
"TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
ifmsh->sync_offset_clockdrift_max);
set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags);
-
- ifmsh->adjusting_tbtt = true;
} else {
msync_dbg(sdata,
"TBTT : max clockdrift=%lld; too small to adjust\n",
(long long)ifmsh->sync_offset_clockdrift_max);
ifmsh->sync_offset_clockdrift_max = 0;
-
- ifmsh->adjusting_tbtt = false;
}
spin_unlock_bh(&ifmsh->sync_offset_lock);
-
- beacon->meshconf->meshconf_cap = ifmsh->adjusting_tbtt ?
- IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING | cap :
- ~IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING & cap;
}
static const struct sync_method sync_methods[] = {
--
2.11.0