This is a note to let you know that I've just added the patch titled drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: drm-bridge-adv7511-reuse-__adv7511_power_on-off-when-probing-edid.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz@xxxxxxxxxx> Date: Mon, 16 Jan 2017 16:52:51 -0800 Subject: drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID From: John Stultz <john.stultz@xxxxxxxxxx> commit 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c upstream. Thus this patch changes the EDID probing logic so that we re-use the __adv7511_power_on/off() calls instead of duplciating logic. This does change behavior slightly as it adds the HPD signal pulse to the EDID probe path, but Archit has had a patch to add HPD signal pulse to the EDID probe path before, so this should address the cases where that helped. Another difference is that regcache_mark_dirty() is also called in the power off path once EDID is probed. Cc: David Airlie <airlied@xxxxxxxx> Cc: Archit Taneja <architt@xxxxxxxxxxxxxx> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Tested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@xxxxxxxxxx Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -573,24 +573,13 @@ static int adv7511_get_modes(struct adv7 unsigned int count; /* Reading the EDID only works if the device is powered */ - if (!adv7511->powered) { - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, 0); - if (adv7511->i2c_main->irq) { - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), - ADV7511_INT0_EDID_READY); - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), - ADV7511_INT1_DDC_ERROR); - } - adv7511->current_edid_segment = -1; - } + if (!adv7511->powered) + __adv7511_power_on(adv7511); edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); if (!adv7511->powered) - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, - ADV7511_POWER_POWER_DOWN); + __adv7511_power_off(adv7511); kfree(adv7511->edid); adv7511->edid = edid; Patches currently in stable-queue which might be from john.stultz@xxxxxxxxxx are queue-4.9/drm-bridge-adv7511-re-write-the-i2c-address-before-edid-probing.patch queue-4.9/drm-bridge-adv7511-rework-adv7511_power_on-off-so-they-can-be-reused-internally.patch queue-4.9/drm-bridge-adv7511-reuse-__adv7511_power_on-off-when-probing-edid.patch