This is a note to let you know that I've just added the patch titled
serial: sh-sci: Fix register offsets for the IRDA serial port
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From foo@baz Thu Nov 9 18:22:51 CET 2017
From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Date: Wed, 11 Jan 2017 16:43:32 +0200
Subject: serial: sh-sci: Fix register offsets for the IRDA serial port
From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
[ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ]
Even though most of its registers are 8-bit wide, the IRDA has two
16-bit registers that make it a 16-bit peripheral and not a 8-bit
peripheral with addresses shifted by one. Fix the registers offset in
the driver and the platform data regshift value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 -
drivers/tty/serial/sh-sci.c | 17 ++++++++---------
2 files changed, 8 insertions(+), 10 deletions(-)
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo
.scscr = SCSCR_TE | SCSCR_RE,
.type = PORT_IRDA,
.ops = &sh770x_sci_port_ops,
- .regshift = 1,
};
static struct resource scif2_resources[] = {
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -163,18 +163,17 @@ static const struct plat_sci_reg sci_reg
},
/*
- * Common definitions for legacy IrDA ports, dependent on
- * regshift value.
+ * Common definitions for legacy IrDA ports.
*/
[SCIx_IRDA_REGTYPE] = {
[SCSMR] = { 0x00, 8 },
- [SCBRR] = { 0x01, 8 },
- [SCSCR] = { 0x02, 8 },
- [SCxTDR] = { 0x03, 8 },
- [SCxSR] = { 0x04, 8 },
- [SCxRDR] = { 0x05, 8 },
- [SCFCR] = { 0x06, 8 },
- [SCFDR] = { 0x07, 16 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 8 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 8 },
+ [SCFDR] = { 0x0e, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
Patches currently in stable-queue which might be from laurent.pinchart+renesas@xxxxxxxxxxxxxxxx are
queue-4.4/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch