4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@xxxxxxxxxxxxx> [ Upstream commit 4ec57fb4edaec523f0f78a0449a3b063749ac58b ] Make sure that the driver processes error conditions even in the fast response path for response from the adapter. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@xxxxxxxxxxxxx> Signed-off-by: Dave Carroll <David.Carroll@xxxxxxxxxxxxx> Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/scsi/aacraid/aachba.c | 291 +++++++++++++++++++++--------------------- 1 file changed, 152 insertions(+), 139 deletions(-) --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -2954,16 +2954,11 @@ static void aac_srb_callback(void *conte return; BUG_ON(fibptr == NULL); - dev = fibptr->dev; - - scsi_dma_unmap(scsicmd); - /* expose physical device if expose_physicald flag is on */ - if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01) - && expose_physicals > 0) - aac_expose_phy_device(scsicmd); + dev = fibptr->dev; srbreply = (struct aac_srb_reply *) fib_data(fibptr); + scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */ if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) { @@ -2976,158 +2971,176 @@ static void aac_srb_callback(void *conte */ scsi_set_resid(scsicmd, scsi_bufflen(scsicmd) - le32_to_cpu(srbreply->data_xfer_length)); - /* - * First check the fib status - */ + } - if (le32_to_cpu(srbreply->status) != ST_OK) { - int len; - printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status)); - len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), - SCSI_SENSE_BUFFERSIZE); - scsicmd->result = DID_ERROR << 16 - | COMMAND_COMPLETE << 8 - | SAM_STAT_CHECK_CONDITION; - memcpy(scsicmd->sense_buffer, - srbreply->sense_data, len); - } + scsi_dma_unmap(scsicmd); - /* - * Next check the srb status - */ - switch ((le32_to_cpu(srbreply->srb_status))&0x3f) { - case SRB_STATUS_ERROR_RECOVERY: - case SRB_STATUS_PENDING: - case SRB_STATUS_SUCCESS: - scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; - break; - case SRB_STATUS_DATA_OVERRUN: - switch (scsicmd->cmnd[0]) { - case READ_6: - case WRITE_6: - case READ_10: - case WRITE_10: - case READ_12: - case WRITE_12: - case READ_16: - case WRITE_16: - if (le32_to_cpu(srbreply->data_xfer_length) - < scsicmd->underflow) - printk(KERN_WARNING"aacraid: SCSI CMD underflow\n"); - else - printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n"); - scsicmd->result = DID_ERROR << 16 - | COMMAND_COMPLETE << 8; - break; - case INQUIRY: { - scsicmd->result = DID_OK << 16 - | COMMAND_COMPLETE << 8; - break; - } - default: - scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; - break; - } - break; - case SRB_STATUS_ABORTED: - scsicmd->result = DID_ABORT << 16 | ABORT << 8; - break; - case SRB_STATUS_ABORT_FAILED: - /* - * Not sure about this one - but assuming the - * hba was trying to abort for some reason - */ - scsicmd->result = DID_ERROR << 16 | ABORT << 8; - break; - case SRB_STATUS_PARITY_ERROR: - scsicmd->result = DID_PARITY << 16 - | MSG_PARITY_ERROR << 8; - break; - case SRB_STATUS_NO_DEVICE: - case SRB_STATUS_INVALID_PATH_ID: - case SRB_STATUS_INVALID_TARGET_ID: - case SRB_STATUS_INVALID_LUN: - case SRB_STATUS_SELECTION_TIMEOUT: - scsicmd->result = DID_NO_CONNECT << 16 - | COMMAND_COMPLETE << 8; - break; + /* expose physical device if expose_physicald flag is on */ + if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01) + && expose_physicals > 0) + aac_expose_phy_device(scsicmd); - case SRB_STATUS_COMMAND_TIMEOUT: - case SRB_STATUS_TIMEOUT: - scsicmd->result = DID_TIME_OUT << 16 - | COMMAND_COMPLETE << 8; - break; + /* + * First check the fib status + */ - case SRB_STATUS_BUSY: - scsicmd->result = DID_BUS_BUSY << 16 - | COMMAND_COMPLETE << 8; - break; + if (le32_to_cpu(srbreply->status) != ST_OK) { + int len; - case SRB_STATUS_BUS_RESET: - scsicmd->result = DID_RESET << 16 - | COMMAND_COMPLETE << 8; - break; + pr_warn("aac_srb_callback: srb failed, status = %d\n", + le32_to_cpu(srbreply->status)); + len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), + SCSI_SENSE_BUFFERSIZE); + scsicmd->result = DID_ERROR << 16 + | COMMAND_COMPLETE << 8 + | SAM_STAT_CHECK_CONDITION; + memcpy(scsicmd->sense_buffer, + srbreply->sense_data, len); + } - case SRB_STATUS_MESSAGE_REJECTED: + /* + * Next check the srb status + */ + switch ((le32_to_cpu(srbreply->srb_status))&0x3f) { + case SRB_STATUS_ERROR_RECOVERY: + case SRB_STATUS_PENDING: + case SRB_STATUS_SUCCESS: + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; + break; + case SRB_STATUS_DATA_OVERRUN: + switch (scsicmd->cmnd[0]) { + case READ_6: + case WRITE_6: + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_16: + case WRITE_16: + if (le32_to_cpu(srbreply->data_xfer_length) + < scsicmd->underflow) + pr_warn("aacraid: SCSI CMD underflow\n"); + else + pr_warn("aacraid: SCSI CMD Data Overrun\n"); scsicmd->result = DID_ERROR << 16 - | MESSAGE_REJECT << 8; + | COMMAND_COMPLETE << 8; + break; + case INQUIRY: + scsicmd->result = DID_OK << 16 + | COMMAND_COMPLETE << 8; break; - case SRB_STATUS_REQUEST_FLUSHED: - case SRB_STATUS_ERROR: - case SRB_STATUS_INVALID_REQUEST: - case SRB_STATUS_REQUEST_SENSE_FAILED: - case SRB_STATUS_NO_HBA: - case SRB_STATUS_UNEXPECTED_BUS_FREE: - case SRB_STATUS_PHASE_SEQUENCE_FAILURE: - case SRB_STATUS_BAD_SRB_BLOCK_LENGTH: - case SRB_STATUS_DELAYED_RETRY: - case SRB_STATUS_BAD_FUNCTION: - case SRB_STATUS_NOT_STARTED: - case SRB_STATUS_NOT_IN_USE: - case SRB_STATUS_FORCE_ABORT: - case SRB_STATUS_DOMAIN_VALIDATION_FAIL: default: + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; + break; + } + break; + case SRB_STATUS_ABORTED: + scsicmd->result = DID_ABORT << 16 | ABORT << 8; + break; + case SRB_STATUS_ABORT_FAILED: + /* + * Not sure about this one - but assuming the + * hba was trying to abort for some reason + */ + scsicmd->result = DID_ERROR << 16 | ABORT << 8; + break; + case SRB_STATUS_PARITY_ERROR: + scsicmd->result = DID_PARITY << 16 + | MSG_PARITY_ERROR << 8; + break; + case SRB_STATUS_NO_DEVICE: + case SRB_STATUS_INVALID_PATH_ID: + case SRB_STATUS_INVALID_TARGET_ID: + case SRB_STATUS_INVALID_LUN: + case SRB_STATUS_SELECTION_TIMEOUT: + scsicmd->result = DID_NO_CONNECT << 16 + | COMMAND_COMPLETE << 8; + break; + + case SRB_STATUS_COMMAND_TIMEOUT: + case SRB_STATUS_TIMEOUT: + scsicmd->result = DID_TIME_OUT << 16 + | COMMAND_COMPLETE << 8; + break; + + case SRB_STATUS_BUSY: + scsicmd->result = DID_BUS_BUSY << 16 + | COMMAND_COMPLETE << 8; + break; + + case SRB_STATUS_BUS_RESET: + scsicmd->result = DID_RESET << 16 + | COMMAND_COMPLETE << 8; + break; + + case SRB_STATUS_MESSAGE_REJECTED: + scsicmd->result = DID_ERROR << 16 + | MESSAGE_REJECT << 8; + break; + case SRB_STATUS_REQUEST_FLUSHED: + case SRB_STATUS_ERROR: + case SRB_STATUS_INVALID_REQUEST: + case SRB_STATUS_REQUEST_SENSE_FAILED: + case SRB_STATUS_NO_HBA: + case SRB_STATUS_UNEXPECTED_BUS_FREE: + case SRB_STATUS_PHASE_SEQUENCE_FAILURE: + case SRB_STATUS_BAD_SRB_BLOCK_LENGTH: + case SRB_STATUS_DELAYED_RETRY: + case SRB_STATUS_BAD_FUNCTION: + case SRB_STATUS_NOT_STARTED: + case SRB_STATUS_NOT_IN_USE: + case SRB_STATUS_FORCE_ABORT: + case SRB_STATUS_DOMAIN_VALIDATION_FAIL: + default: #ifdef AAC_DETAILED_STATUS_INFO - printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n", - le32_to_cpu(srbreply->srb_status) & 0x3F, - aac_get_status_string( - le32_to_cpu(srbreply->srb_status) & 0x3F), - scsicmd->cmnd[0], - le32_to_cpu(srbreply->scsi_status)); + pr_info("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\n", + le32_to_cpu(srbreply->srb_status) & 0x3F, + aac_get_status_string( + le32_to_cpu(srbreply->srb_status) & 0x3F), + scsicmd->cmnd[0], + le32_to_cpu(srbreply->scsi_status)); #endif - if ((scsicmd->cmnd[0] == ATA_12) - || (scsicmd->cmnd[0] == ATA_16)) { - if (scsicmd->cmnd[2] & (0x01 << 5)) { - scsicmd->result = DID_OK << 16 - | COMMAND_COMPLETE << 8; - break; - } else { - scsicmd->result = DID_ERROR << 16 - | COMMAND_COMPLETE << 8; - break; - } + /* + * When the CC bit is SET by the host in ATA pass thru CDB, + * driver is supposed to return DID_OK + * + * When the CC bit is RESET by the host, driver should + * return DID_ERROR + */ + if ((scsicmd->cmnd[0] == ATA_12) + || (scsicmd->cmnd[0] == ATA_16)) { + + if (scsicmd->cmnd[2] & (0x01 << 5)) { + scsicmd->result = DID_OK << 16 + | COMMAND_COMPLETE << 8; + break; } else { scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; - break; + break; } + } else { + scsicmd->result = DID_ERROR << 16 + | COMMAND_COMPLETE << 8; + break; } - if (le32_to_cpu(srbreply->scsi_status) - == SAM_STAT_CHECK_CONDITION) { - int len; - - scsicmd->result |= SAM_STAT_CHECK_CONDITION; - len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), - SCSI_SENSE_BUFFERSIZE); + } + if (le32_to_cpu(srbreply->scsi_status) + == SAM_STAT_CHECK_CONDITION) { + int len; + + scsicmd->result |= SAM_STAT_CHECK_CONDITION; + len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), + SCSI_SENSE_BUFFERSIZE); #ifdef AAC_DETAILED_STATUS_INFO - printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", - le32_to_cpu(srbreply->status), len); + pr_warn("aac_srb_callback: check condition, status = %d len=%d\n", + le32_to_cpu(srbreply->status), len); #endif - memcpy(scsicmd->sense_buffer, - srbreply->sense_data, len); - } + memcpy(scsicmd->sense_buffer, + srbreply->sense_data, len); } + /* * OR in the scsi status (already shifted up a bit) */