3.6.11.9-rc1 stable review patch.
If anyone has any objections, please let me know.
------------------
From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
[ Upstream commit 30d5b709da23f4ab9836c7f66d2d2e780a69cf12 ]
For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++--
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index d066f25..e8e3929 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3562,7 +3562,7 @@ static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, int chain,
static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
{
int chain;
- u32 regval;
+ u32 regval, value;
u32 ant_div_ctl1;
static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
AR_PHY_SWITCH_CHAIN_0,
@@ -3570,7 +3570,11 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
AR_PHY_SWITCH_CHAIN_2,
};
- u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+ if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+ ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+ AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+ value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
if (AR_SREV_9462(ah)) {
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 84d3d49..3dead81 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -339,6 +339,8 @@
#define AR_PHY_CCA_NOM_VAL_9330_2GHZ -118
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
/*
* AGC Field Definitions
*/
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html