Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 18/10/17 14:03, Tejun Heo wrote:
On Tue, Oct 17, 2017 at 04:05:42PM +0800, Huacai Chen wrote:
In non-coherent DMA mode, kernel uses cache flushing operations to
maintain I/O coherency, so in ata_do_dev_read_id() the DMA buffer
should be aligned to ARCH_DMA_MINALIGN. Otherwise, If a DMA buffer
and a kernel structure share a same cache line, and if the kernel
structure has dirty data, cache_invalidate (no writeback) will cause
data corruption.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
---
  drivers/ata/libata-core.c | 15 +++++++++++++--
  1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ee4c1ec..e134955 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1833,8 +1833,19 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
  unsigned int ata_do_dev_read_id(struct ata_device *dev,
  					struct ata_taskfile *tf, u16 *id)
  {
-	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
-				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+	u16 *devid;
+	int res, size = sizeof(u16) * ATA_ID_WORDS;
+
+	if (IS_ALIGNED((unsigned long)id, dma_get_cache_alignment(&dev->tdev)))
+		res = ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE, id, size, 0);
+	else {
+		devid = kmalloc(size, GFP_KERNEL);
+		res = ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE, devid, size, 0);
+		memcpy(id, devid, size);
+		kfree(devid);
+	}
+
+	return res;
Hmm... I think it'd be a lot better to ensure that the buffers are
aligned properly to begin with.  There are only two buffers which are
used for id reading - ata_port->sector_buf and ata_device->id.  Both
are embedded arrays but making them separately allocated aligned
buffers shouldn't be difficult.

Thanks.

FWIW, I agree that the buffers used for DMA should be split out from the structure. We ran into this problem on MIPS last year, 4ee34ea3a12396f35b26d90a094c75db95080baa ("libata: Align ata_device's id on a cacheline") partially fixed it, but likely should have also cacheline aligned the following devslp_timing in the struct such that we guarantee that members of the struct not used for DMA do not share the same cacheline as the DMA buffer. Not having this means that architectures, such as MIPS, which in some cases have to perform manual invalidation of DMA buffer can clobber valid adjacent data if it is in the same cacheline.

Thanks,
Matt





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]