4.13-stable review patch. If anyone has any objections, please let me know. ------------------ From: Sebastian Frei <dr.nop@xxxxxxx> commit 7eac35ea29dc54cbc8399de84c9bf16553575b89 upstream. When adding GPIO support for the cp2105, the mentioned commit by Martyn Welch introduced a query for the part number of the chip. Unfortunately the driver aborts probing when this query fails, so currently the driver can not be used with chips not supporting this query. I have a data cable for Siemens mobile phones (ID 10ab:10c5) where this is the case. With this patch the driver can be bound even if the part number can not be queried. Fixes: cf5276ce7867 ("USB: serial: cp210x: Adding GPIO support for CP2105") Signed-off-by: Sebastian Frei <dr.nop@xxxxxxx> [ johan: amend commit message; shorten error message and demote to warning; drop unnecessary move of usb_set_serial_data() ] Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/cp210x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -352,6 +352,7 @@ static struct usb_serial_driver * const #define CP210X_PARTNUM_CP2104 0x04 #define CP210X_PARTNUM_CP2105 0x05 #define CP210X_PARTNUM_CP2108 0x08 +#define CP210X_PARTNUM_UNKNOWN 0xFF /* CP210X_GET_COMM_STATUS returns these 0x13 bytes */ struct cp210x_comm_status { @@ -1491,8 +1492,11 @@ static int cp210x_attach(struct usb_seri result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, CP210X_GET_PARTNUM, &priv->partnum, sizeof(priv->partnum)); - if (result < 0) - goto err_free_priv; + if (result < 0) { + dev_warn(&serial->interface->dev, + "querying part number failed\n"); + priv->partnum = CP210X_PARTNUM_UNKNOWN; + } usb_set_serial_data(serial, priv); @@ -1505,10 +1509,6 @@ static int cp210x_attach(struct usb_seri } return 0; -err_free_priv: - kfree(priv); - - return result; } static void cp210x_disconnect(struct usb_serial *serial)