[PATCH 4.13 062/160] usb: pci-quirks.c: Corrected timeout values used in handshake

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.13-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Dickerson <jim.dickerson@xxxxxxx>

commit 114ec3a6f9096d211a4aff4277793ba969a62c73 upstream.

Servers were emitting failed handoff messages but were not
waiting the full 1 second as designated in section 4.22.1 of
the eXtensible Host Controller Interface specifications. The
handshake was using wrong units so calls were made with milliseconds
not microseconds. Comments referenced 5 seconds not 1 second as
in specs.

The wrong units were also corrected in a second handshake call.

Signed-off-by: Jim Dickerson <jim.dickerson@xxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/host/pci-quirks.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -1022,7 +1022,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports
  *
  * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
  * It signals to the BIOS that the OS wants control of the host controller,
- * and then waits 5 seconds for the BIOS to hand over control.
+ * and then waits 1 second for the BIOS to hand over control.
  * If we timeout, assume the BIOS is broken and take control anyway.
  */
 static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
@@ -1069,9 +1069,9 @@ static void quirk_usb_handoff_xhci(struc
 	if (val & XHCI_HC_BIOS_OWNED) {
 		writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
 
-		/* Wait for 5 seconds with 10 microsecond polling interval */
+		/* Wait for 1 second with 10 microsecond polling interval */
 		timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
-				0, 5000, 10);
+				0, 1000000, 10);
 
 		/* Assume a buggy BIOS and take HC ownership anyway */
 		if (timeout) {
@@ -1100,7 +1100,7 @@ hc_init:
 	 * operational or runtime registers.  Wait 5 seconds and no more.
 	 */
 	timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
-			5000, 10);
+			5000000, 10);
 	/* Assume a buggy HC and start HC initialization anyway */
 	if (timeout) {
 		val = readl(op_reg_base + XHCI_STS_OFFSET);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]