[PATCH 3.2 13/74] xhci: Limit USB2 port wake support for AMD Promontory hosts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.2.94-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jiahau Chang <jiahau@xxxxxxxxx>

commit dec08194ffeccfa1cf085906b53d301930eae18f upstream.

For AMD Promontory xHCI host, although you can disable USB 2.0 ports in
BIOS settings, those ports will be enabled anyway after you remove a
device on that port and re-plug it in again. It's a known limitation of
the chip. As a workaround we can clear the PORT_WAKE_BITS.

This will disable wake on connect, disconnect and overcurrent on
AMD Promontory USB2 ports

[checkpatch cleanup and commit message reword -Mathias]
Cc: Tsai Nicholas <nicholas.tsai@xxxxxxx>
Signed-off-by: Jiahau Chang <Lars_Chang@xxxxxxxxxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/usb/host/xhci-hub.c |  3 +++
 drivers/usb/host/xhci-pci.c | 12 ++++++++++++
 drivers/usb/host/xhci.h     |  1 +
 3 files changed, 16 insertions(+)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1023,6 +1023,9 @@ int xhci_bus_suspend(struct usb_hcd *hcd
 				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
 				t2 &= ~PORT_WKDISC_E;
 			}
+			if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) &&
+			    (hcd->speed < HCD_USB3))
+				t2 &= ~PORT_WAKE_BITS;
 		} else
 			t2 &= ~PORT_WAKE_BITS;
 
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -45,6 +45,11 @@
 #define PCI_DEVICE_ID_INTEL_APL_XHCI			0x5aa8
 #define PCI_DEVICE_ID_INTEL_DNV_XHCI			0x19d0
 
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -110,6 +115,13 @@ static void xhci_pci_quirks(struct devic
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
+		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
+		xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
 		xhci->quirks |= XHCI_INTEL_HOST;
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1502,6 +1502,7 @@ struct xhci_hcd {
 #define XHCI_SPURIOUS_WAKEUP	(1 << 18)
 #define XHCI_PME_STUCK_QUIRK	(1 << 20)
 #define XHCI_MISSING_CAS	(1 << 24)
+#define XHCI_U2_DISABLE_WAKE	(1 << 27)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]