This is a note to let you know that I've just added the patch titled
USB: dummy-hcd: fix connection failures (wrong speed)
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-dummy-hcd-fix-connection-failures-wrong-speed.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From fe659bcc9b173bcfdd958ce2aec75e47651e74e1 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Date: Tue, 26 Sep 2017 15:15:22 -0400
Subject: USB: dummy-hcd: fix connection failures (wrong speed)
From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
commit fe659bcc9b173bcfdd958ce2aec75e47651e74e1 upstream.
The dummy-hcd UDC driver is not careful about the way it handles
connection speeds. It ignores the module parameter that is supposed
to govern the maximum connection speed and it doesn't set the HCD
flags properly for the case where it ends up running at full speed.
The result is that in many cases, gadget enumeration over dummy-hcd
fails because the bMaxPacketSize byte in the device descriptor is set
incorrectly. For example, the default settings call for a high-speed
connection, but the maxpacket value for ep0 ends up being set for a
Super-Speed connection.
This patch fixes the problem by initializing the gadget's max_speed
and the HCD flags correctly.
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/gadget/udc/dummy_hcd.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1030,7 +1030,12 @@ static int dummy_udc_probe(struct platfo
memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
dum->gadget.name = gadget_name;
dum->gadget.ops = &dummy_ops;
- dum->gadget.max_speed = USB_SPEED_SUPER;
+ if (mod_data.is_super_speed)
+ dum->gadget.max_speed = USB_SPEED_SUPER;
+ else if (mod_data.is_high_speed)
+ dum->gadget.max_speed = USB_SPEED_HIGH;
+ else
+ dum->gadget.max_speed = USB_SPEED_FULL;
dum->gadget.dev.parent = &pdev->dev;
init_dummy_udc_hw(dum);
@@ -2559,8 +2564,6 @@ static struct hc_driver dummy_hcd = {
.product_desc = "Dummy host controller",
.hcd_priv_size = sizeof(struct dummy_hcd),
- .flags = HCD_USB3 | HCD_SHARED,
-
.reset = dummy_setup,
.start = dummy_start,
.stop = dummy_stop,
@@ -2589,8 +2592,12 @@ static int dummy_hcd_probe(struct platfo
dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
dum = *((void **)dev_get_platdata(&pdev->dev));
- if (!mod_data.is_super_speed)
+ if (mod_data.is_super_speed)
+ dummy_hcd.flags = HCD_USB3 | HCD_SHARED;
+ else if (mod_data.is_high_speed)
dummy_hcd.flags = HCD_USB2;
+ else
+ dummy_hcd.flags = HCD_USB11;
hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
if (!hs_hcd)
return -ENOMEM;
Patches currently in stable-queue which might be from stern@xxxxxxxxxxxxxxxxxxx are
queue-4.9/usb-storage-fix-bogus-hardware-error-messages-for-ata-pass-thru-devices.patch
queue-4.9/usb-dummy-hcd-fix-infinite-loop-resubmission-bug.patch
queue-4.9/usb-storage-unusual_devs-entry-to-fix-write-access-regression-for-seagate-external-drives.patch
queue-4.9/usb-gadgetfs-fix-copy_to_user-while-holding-spinlock.patch
queue-4.9/usb-devio-don-t-corrupt-user-memory.patch
queue-4.9/usb-gadgetfs-fix-crash-caused-by-inadequate-synchronization.patch
queue-4.9/usb-dummy-hcd-fix-connection-failures-wrong-speed.patch
queue-4.9/usb-dummy-hcd-fix-erroneous-synchronization-change.patch