[PATCH 1/4] xhci: Identify USB 3.1 capable hosts by their port protocol capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Many USB 3.1 capable hosts never updated the Serial Bus Release Number
(SBRN) register to USB 3.1 from USB 3.0

xhci driver identified USB 3.1 capable hosts based on this SBRN register,
which according to specs "contains the release of the Universal Serial
Bus Specification with which this Universal Serial Bus Host Controller
module is compliant." but still in october 2017 gives USB 3.0 as
the only possible option.

Make an additional check for USB 3.1 support and enable it if the xHCI
supported protocol capablity lists USB 3.1 capable ports.

Cc: <stable@xxxxxxxxxxxxxxx> # v4.6+
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
 drivers/usb/host/xhci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ee198ea..51535ba 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4805,7 +4805,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 		 */
 		hcd->has_tt = 1;
 	} else {
-		if (xhci->sbrn == 0x31) {
+		/* Some 3.1 hosts return sbrn 0x30, can't rely on sbrn alone */
+		if (xhci->sbrn == 0x31 || xhci->usb3_rhub.min_rev >= 1) {
 			xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n");
 			hcd->speed = HCD_USB31;
 			hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
-- 
2.7.4




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]