This is a note to let you know that I've just added the patch titled usb: chipidea: vbus event may exist before starting gadget to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: usb-chipidea-vbus-event-may-exist-before-starting-gadget.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From foo@baz Thu Oct 5 10:28:31 CEST 2017 From: Peter Chen <peter.chen@xxxxxxx> Date: Wed, 19 Oct 2016 15:32:58 +0800 Subject: usb: chipidea: vbus event may exist before starting gadget From: Peter Chen <peter.chen@xxxxxxx> [ Upstream commit c3b674a04b8ab62a1d35e86714d466af0a0ecc18 ] At some situations, the vbus may already be there before starting gadget. So we need to check vbus event after switching to gadget in order to handle missing vbus event. The typical use cases are plugging vbus cable before driver load or the vbus has already been there after stopping host but before starting gadget. Signed-off-by: Peter Chen <peter.chen@xxxxxxx> Tested-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx> Reported-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/chipidea/otg.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -134,9 +134,9 @@ void ci_handle_vbus_change(struct ci_hdr if (!ci->is_otg) return; - if (hw_read_otgsc(ci, OTGSC_BSV)) + if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active) usb_gadget_vbus_connect(&ci->gadget); - else + else if (!hw_read_otgsc(ci, OTGSC_BSV) && ci->vbus_active) usb_gadget_vbus_disconnect(&ci->gadget); } @@ -175,14 +175,21 @@ static void ci_handle_id_switch(struct c ci_role_stop(ci); - if (role == CI_ROLE_GADGET) + if (role == CI_ROLE_GADGET && + IS_ERR(ci->platdata->vbus_extcon.edev)) /* - * wait vbus lower than OTGSC_BSV before connecting - * to host + * Wait vbus lower than OTGSC_BSV before connecting + * to host. If connecting status is from an external + * connector instead of register, we don't need to + * care vbus on the board, since it will not affect + * external connector status. */ hw_wait_vbus_lower_bsv(ci); ci_role_start(ci, role); + /* vbus change may have already occurred */ + if (role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); } } /** Patches currently in stable-queue which might be from peter.chen@xxxxxxx are queue-4.9/usb-chipidea-vbus-event-may-exist-before-starting-gadget.patch