Patch "md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list" has been added to the 4.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     md-raid5-preserve-stripe_on_unplug_list-in-break_stripe_batch_list.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 184a09eb9a2fe425e49c9538f1604b05ed33cfef Mon Sep 17 00:00:00 2001
From: Dennis Yang <dennisyang@xxxxxxxx>
Date: Wed, 6 Sep 2017 11:02:35 +0800
Subject: md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list

From: Dennis Yang <dennisyang@xxxxxxxx>

commit 184a09eb9a2fe425e49c9538f1604b05ed33cfef upstream.

In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST
set, it indicates that this stripe_head is already in the raid5_plug_cb
list and release_stripe() would be called instead to drop a reference
count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this
stripe_head and it will get queued into the raid5_plug_cb list.

Since break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST,
A stripe could be re-added to plug list while it is still on that list
in the following situation. If stripe_head A is added to another
stripe_head B's batch list, in this case A will have its
batch_head != NULL and be added into the plug list. After that,
stripe_head B gets handled and called break_stripe_batch_list() to
reset all the batched stripe_head(including A which is still on
the plug list)'s state and reset their batch_head to NULL.
Before the plug list gets processed, if there is another write request
comes in and get stripe_head A, A will have its batch_head == NULL
(cleared by calling break_stripe_batch_list() on B) and be added to
plug list once again.

Signed-off-by: Dennis Yang <dennisyang@xxxxxxxx>
Signed-off-by: Shaohua Li <shli@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/md/raid5.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4264,7 +4264,8 @@ static void break_stripe_batch_list(stru
 
 		set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS |
 					    (1 << STRIPE_PREREAD_ACTIVE) |
-					    (1 << STRIPE_DEGRADED)),
+					    (1 << STRIPE_DEGRADED) |
+					    (1 << STRIPE_ON_UNPLUG_LIST)),
 			      head_sh->state & (1 << STRIPE_INSYNC));
 
 		sh->check_state = head_sh->check_state;


Patches currently in stable-queue which might be from dennisyang@xxxxxxxx are

queue-4.4/md-raid5-preserve-stripe_on_unplug_list-in-break_stripe_batch_list.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]