From: Victor Gu <xigu@xxxxxxxxxxx>
When setting the PIO_ADDR_LS register during a configuration read, we
were properly passing the device number, function number and register
number, but not the bus number, causing issues when reading the
configuration of PCIe devices.
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Victor Gu <xigu@xxxxxxxxxxx>
Reviewed-by: Wilson Ding <dingwei@xxxxxxxxxxx>
Reviewed-by: Nadav Haklai <nadavh@xxxxxxxxxxx>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
---
drivers/pci/host/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index da2881ba7737..af7a9c4a61a4 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -459,7 +459,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
advk_writel(pcie, reg, PIO_CTRL);
/* Program the address registers */
- reg = PCIE_BDF(devfn) | PCIE_CONF_REG(where);
+ reg = PCIE_CONF_ADDR(bus->number, devfn, where);
advk_writel(pcie, reg, PIO_ADDR_LS);
advk_writel(pcie, 0, PIO_ADDR_MS);
--
2.13.5