This is a note to let you know that I've just added the patch titled
iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From c65e3d6ef4bfdc4c8460509f08507cf7dc026974 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
Date: Tue, 29 Aug 2017 13:45:11 +0200
Subject: iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
Data-ready line in LIS3MDL is routed to drdy pin and it is not possible
to select a different INT pin. st_sensors_set_dataready_irq() assumes
that if drdy int address is not exported in register map, irq trigger
is not supported by the sensor and hw_irq_trigger is always false.
Based on this configuration st_sensors_irq_thread does not consume
generated interrupt causing an unhandled irq.
Fix this taking into account status register address in
st_sensors_set_dataready_irq()
Fixes: 90efe0556292 (iio: st_sensors: harden interrupt handling)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/common/st_sensors/st_sensors_core.c | 11 ++++++++++-
drivers/iio/magnetometer/st_magn_core.c | 4 ++++
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index d99bb1460fe2..02e833b14db0 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -463,8 +463,17 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
u8 drdy_mask;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor_settings->drdy_irq.addr)
+ if (!sdata->sensor_settings->drdy_irq.addr) {
+ /*
+ * there are some devices (e.g. LIS3MDL) where drdy line is
+ * routed to a given pin and it is not possible to select a
+ * different one. Take into account irq status register
+ * to understand if irq trigger can be properly supported
+ */
+ if (sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+ sdata->hw_irq_trigger = enable;
return 0;
+ }
/* Enable/Disable the interrupt generator 1. */
if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) {
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 703e77008652..2e36d746f5bc 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -315,6 +315,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
},
},
+ .drdy_irq = {
+ /* drdy line is routed drdy pin */
+ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ },
.multi_read_bit = true,
.bootime = 2,
},
--
2.14.1