From: Varun Prakash <varun@xxxxxxxxxxx>
[ Upstream commit 4d65491c269729a1e3b375c45e73213f49103d33 ]
In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.
This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example
Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k
Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct
Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.
Signed-off-by: Varun Prakash <varun@xxxxxxxxxxx>
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
Signed-off-by: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/target/iscsi/iscsi_target_erl0.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c
index 6c88fb021444..4eeb82cf79e4 100644
--- a/drivers/target/iscsi/iscsi_target_erl0.c
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -44,10 +44,8 @@ void iscsit_set_dataout_sequence_values(
*/
if (cmd->unsolicited_data) {
cmd->seq_start_offset = cmd->write_data_done;
- cmd->seq_end_offset = (cmd->write_data_done +
- ((cmd->se_cmd.data_length >
- conn->sess->sess_ops->FirstBurstLength) ?
- conn->sess->sess_ops->FirstBurstLength : cmd->se_cmd.data_length));
+ cmd->seq_end_offset = min(cmd->se_cmd.data_length,
+ conn->sess->sess_ops->FirstBurstLength);
return;
}
--
2.11.0