4.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
commit af0b0baa89953aed07034725023371b2fa50a1e6 upstream.
When setting the pin function for external interrupts, the driver used
wrong IO memory address base. The pin function register is always under
pctl_base, not the eint_base.
By updating wrong register, the external interrupts for chosen GPIO
would not work at all and some other GPIO might be configured to wrong
value. For example on Exynos5433-based boards, the external interrupts
for gpf{1-5}-X GPIOs should not work at all (driver toggled reserved
registers from ALIVE bank instead).
Platforms other than Exynos5433 should not be affected as eint_base
equals pctl_base in such case.
Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank")
Reported-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Tested-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -174,10 +174,10 @@ static int exynos_irq_request_resources(
spin_lock_irqsave(&bank->slock, flags);
- con = readl(bank->eint_base + reg_con);
+ con = readl(bank->pctl_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
- writel(con, bank->eint_base + reg_con);
+ writel(con, bank->pctl_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
@@ -202,10 +202,10 @@ static void exynos_irq_release_resources
spin_lock_irqsave(&bank->slock, flags);
- con = readl(bank->eint_base + reg_con);
+ con = readl(bank->pctl_base + reg_con);
con &= ~(mask << shift);
con |= FUNC_INPUT << shift;
- writel(con, bank->eint_base + reg_con);
+ writel(con, bank->pctl_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);