From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> [ Upstream commit 67430a39ca7a6af28aade5acb92d43ee257c1014 ] Volatile controls should only be accessed when the firmware is active, currently however writes to these controls will succeed, but the data will be lost, if the firmware is powered down. Update this behaviour such that an error is returned the same as it is for reads. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> --- sound/soc/codecs/wm_adsp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index b943dde8dbe5..3bdd81930486 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -789,7 +789,10 @@ static int wm_coeff_put(struct snd_kcontrol *kctl, mutex_lock(&ctl->dsp->pwr_lock); - memcpy(ctl->cache, p, ctl->len); + if (ctl->flags & WMFW_CTL_FLAG_VOLATILE) + ret = -EPERM; + else + memcpy(ctl->cache, p, ctl->len); ctl->set = 1; if (ctl->enabled && ctl->dsp->running) @@ -816,6 +819,8 @@ static int wm_coeff_tlv_put(struct snd_kcontrol *kctl, ctl->set = 1; if (ctl->enabled && ctl->dsp->running) ret = wm_coeff_write_control(ctl, ctl->cache, size); + else if (ctl->flags & WMFW_CTL_FLAG_VOLATILE) + ret = -EPERM; } mutex_unlock(&ctl->dsp->pwr_lock); -- 2.11.0