From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[ Upstream commit a424f0de61638cbb5047e0a888c54da9cf471f90 ]
Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need
to make sure that the IMP/CPU port is included in the forwarding
decision.
Without this change, switching between non-management ports would work,
but not between management ports and non-management ports thus breaking
the default state in which DSA switch are brought up.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Reported-by: Eric Anholt <eric@xxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/net/dsa/b53/b53_common.c | 10 ++++++++++
drivers/net/dsa/b53/b53_regs.h | 4 ++++
2 files changed, 14 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3ec573c13dac..c26debc531ee 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -326,6 +326,7 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
static void b53_set_forwarding(struct b53_device *dev, int enable)
{
+ struct dsa_switch *ds = dev->ds;
u8 mgmt;
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
@@ -336,6 +337,15 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
mgmt &= ~SM_SW_FWD_EN;
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+ /* Include IMP port in dumb forwarding mode when no tagging protocol is
+ * set
+ */
+ if (ds->ops->get_tag_protocol(ds) == DSA_TAG_PROTO_NONE) {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+ mgmt |= B53_MII_DUMB_FWDG_EN;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+ }
}
static void b53_enable_vlan(struct b53_device *dev, bool enable)
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index dac0af4e2cd0..81044000ce75 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -104,6 +104,10 @@
#define B53_UC_FWD_EN BIT(6)
#define B53_MC_FWD_EN BIT(7)
+/* Switch control (8 bit) */
+#define B53_SWITCH_CTRL 0x22
+#define B53_MII_DUMB_FWDG_EN BIT(6)
+
/* (16 bit) */
#define B53_UC_FLOOD_MASK 0x32
#define B53_MC_FLOOD_MASK 0x34
--
2.11.0