This is a note to let you know that I've just added the patch titled mtd: nand: hynix: add support for 20nm NAND chips to the 4.13-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: mtd-nand-hynix-add-support-for-20nm-nand-chips.patch and it can be found in the queue-4.13 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From fd213b5bae800dc00a2930dcd07f63ab9bbff3f9 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Date: Sat, 5 Aug 2017 14:16:24 +0200 Subject: mtd: nand: hynix: add support for 20nm NAND chips From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> commit fd213b5bae800dc00a2930dcd07f63ab9bbff3f9 upstream. According to the datasheet of the H27UCG8T2BTR the NAND Technology field (6th byte of the "Device Identifier Description", bits 0-2) the following values are possible: - 0x0 = 48nm - 0x1 = 41nm - 0x2 = 32nm - 0x3 = 26nm - 0x4 = 20nm - (all others are reserved) Fix this by extending the mask for this field to allow detecting value 0x4 (20nm) as valid NAND technology. Without this the detection of the ECC requirements fails, because the code assumes that the device is a 48nm device (0x4 & 0x3 = 0x0) and aborts with "Invalid ECC requirements" because it cannot map the "ECC Level". Extending the mask makes the ECC requirement detection code recognize this chip as <= 26nm and sets up the ECC step size and ECC strength correctly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Fixes: 78f3482d7480 ("mtd: nand: hynix: Rework NAND ID decoding to extract more information") Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mtd/nand/nand_hynix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/mtd/nand/nand_hynix.c +++ b/drivers/mtd/nand/nand_hynix.c @@ -477,7 +477,7 @@ static void hynix_nand_extract_ecc_requi * The ECC requirements field meaning depends on the * NAND technology. */ - u8 nand_tech = chip->id.data[5] & 0x3; + u8 nand_tech = chip->id.data[5] & 0x7; if (nand_tech < 3) { /* > 26nm, reference: H27UBG8T2A datasheet */ @@ -533,7 +533,7 @@ static void hynix_nand_extract_scramblin if (nand_tech > 0) chip->options |= NAND_NEED_SCRAMBLING; } else { - nand_tech = chip->id.data[5] & 0x3; + nand_tech = chip->id.data[5] & 0x7; /* < 32nm */ if (nand_tech > 2) Patches currently in stable-queue which might be from martin.blumenstingl@xxxxxxxxxxxxxx are queue-4.13/mtd-nand-hynix-add-support-for-20nm-nand-chips.patch