This is a note to let you know that I've just added the patch titled
iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set
to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-adc-ti-ads1015-enable-conversion-when-config_pm-is-not-set.patch
and it can be found in the queue-4.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From e8245c68350104b6022b6783719e843d69ea7c43 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Date: Fri, 21 Jul 2017 00:24:19 +0900
Subject: iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set
From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
commit e8245c68350104b6022b6783719e843d69ea7c43 upstream.
The ADS1015 device have two operating modes, continuous conversion mode
and single-shot mode. This driver assumes that the continuous conversion
mode is selected by runtime resume callback when the ADC result is
requested.
If CONFIG_PM is disabled, the device is always in the default single-shot
mode and no one begins a single conversion. So the conversion register
doesn't contain valid ADC result. Fix it by changing the continuous mode
in probe function.
Cc: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/adc/ti-ads1015.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -623,6 +623,13 @@ static int ads1015_probe(struct i2c_clie
dev_err(&client->dev, "iio triggered buffer setup failed\n");
return ret;
}
+
+ ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+ ADS1015_CFG_MOD_MASK,
+ ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
+ if (ret)
+ return ret;
+
ret = pm_runtime_set_active(&client->dev);
if (ret)
goto err_buffer_cleanup;
Patches currently in stable-queue which might be from akinobu.mita@xxxxxxxxx are
queue-4.13/iio-adc-ti-ads1015-enable-conversion-when-config_pm-is-not-set.patch
queue-4.13/iio-adc-ti-ads1015-add-adequate-wait-time-to-get-correct-conversion.patch
queue-4.13/iio-adc-ti-ads1015-don-t-return-invalid-value-from-buffer-setup-callbacks.patch
queue-4.13/iio-adc-ti-ads1015-fix-incorrect-data-rate-setting-update.patch
queue-4.13/iio-adc-ti-ads1015-fix-scale-information-for-ads1115.patch
queue-4.13/iio-adc-ti-ads1015-avoid-getting-stale-result-after-runtime-resume.patch