4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Alexey Brodkin <Alexey.Brodkin@xxxxxxxxxxxx> commit 7d79cee2c6540ea64dd917a14e2fd63d4ac3d3c0 upstream. It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Reported-by: Vladimir Kondratiev <vladimir.kondratiev@xxxxxxxxx> Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx> Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx> [vgupta: PAR40 regs only written if PAE40 exist] Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arc/include/asm/cache.h | 2 ++ arch/arc/mm/cache.c | 13 +++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -89,7 +89,9 @@ extern unsigned long perip_base, perip_e #define ARC_REG_SLC_FLUSH 0x904 #define ARC_REG_SLC_INVALIDATE 0x905 #define ARC_REG_SLC_RGN_START 0x914 +#define ARC_REG_SLC_RGN_START1 0x915 #define ARC_REG_SLC_RGN_END 0x916 +#define ARC_REG_SLC_RGN_END1 0x917 /* Bit val in SLC_CONTROL */ #define SLC_CTRL_IM 0x040 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -562,6 +562,7 @@ noinline void slc_op(phys_addr_t paddr, static DEFINE_SPINLOCK(lock); unsigned long flags; unsigned int ctrl; + phys_addr_t end; spin_lock_irqsave(&lock, flags); @@ -591,8 +592,16 @@ noinline void slc_op(phys_addr_t paddr, * END needs to be setup before START (latter triggers the operation) * END can't be same as START, so add (l2_line_sz - 1) to sz */ - write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1)); - write_aux_reg(ARC_REG_SLC_RGN_START, paddr); + end = paddr + sz + l2_line_sz - 1; + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end)); + + write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end)); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr)); + + write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr)); while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);