[PATCH 2/3] drm/vmwgfx: Fix large topology crash

[Sinclair Yeh <syeh@xxxxxxxxxx>]

The previous attempt at this had an issue with with num_clips > 1
because it would always end up using the coordinates of the last
clip while using width and height calculated from the bounding
box of all the clips.

So if the last clip happens to be not at the top-left corner of
the bounding box, the CPU blit operation would go out of bounds.

The original intent was to coalesce all the clips into one blit,
and to do that we need to also track the starting point of the
content buffer.

Commit a1ac63391230 upstream.
Cc: <stable@xxxxxxxxxxxxxxx> # 4.11.x

Signed-off-by: Sinclair Yeh <syeh@xxxxxxxxxx>
Reviewed-by: Thomas Hellstrom <thellstrom@xxxxxxxxxx>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
index 15e98a5..55716d0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
@@ -53,6 +53,8 @@ enum stdu_content_type {
  * @right: Right side of bounding box.
  * @top: Top side of bounding box.
  * @bottom: Bottom side of bounding box.
+ * @fb_left: Left side of the framebuffer/content bounding box
+ * @fb_top: Top of the framebuffer/content bounding box
  * @buf: DMA buffer when DMA-ing between buffer and screen targets.
  * @sid: Surface ID when copying between surface and screen targets.
  */
@@ -60,6 +62,7 @@ struct vmw_stdu_dirty {
 	struct vmw_kms_dirty base;
 	SVGA3dTransferType  transfer;
 	s32 left, right, top, bottom;
+	s32 fb_left, fb_top;
 	u32 pitch;
 	union {
 		struct vmw_dma_buffer *buf;
@@ -848,7 +851,7 @@ static void vmw_stdu_dmabuf_fifo_commit(struct vmw_kms_dirty *dirty)
  *
  * @dirty: The closure structure.
  *
- * This function calculates the bounding box for all the incoming clips
+ * This function calculates the bounding box for all the incoming clips.
  */
 static void vmw_stdu_dmabuf_cpu_clip(struct vmw_kms_dirty *dirty)
 {
@@ -857,11 +860,19 @@ static void vmw_stdu_dmabuf_cpu_clip(struct vmw_kms_dirty *dirty)
 
 	dirty->num_hits = 1;
 
-	/* Calculate bounding box */
+	/* Calculate destination bounding box */
 	ddirty->left = min_t(s32, ddirty->left, dirty->unit_x1);
 	ddirty->top = min_t(s32, ddirty->top, dirty->unit_y1);
 	ddirty->right = max_t(s32, ddirty->right, dirty->unit_x2);
 	ddirty->bottom = max_t(s32, ddirty->bottom, dirty->unit_y2);
+
+	/*
+	 * Calculate content bounding box.  We only need the top-left
+	 * coordinate because width and height will be the same as the
+	 * destination bounding box above
+	 */
+	ddirty->fb_left = min_t(s32, ddirty->fb_left, dirty->fb_x);
+	ddirty->fb_top  = min_t(s32, ddirty->fb_top, dirty->fb_y);
 }
 
 
@@ -898,11 +909,11 @@ static void vmw_stdu_dmabuf_cpu_commit(struct vmw_kms_dirty *dirty)
 	/* Assume we are blitting from Host (display_srf) to Guest (dmabuf) */
 	src_pitch = stdu->display_srf->base_size.width * stdu->cpp;
 	src = ttm_kmap_obj_virtual(&stdu->host_map, &not_used);
-	src += dirty->unit_y1 * src_pitch + dirty->unit_x1 * stdu->cpp;
+	src += ddirty->top * src_pitch + ddirty->left * stdu->cpp;
 
 	dst_pitch = ddirty->pitch;
 	dst = ttm_kmap_obj_virtual(&stdu->guest_map, &not_used);
-	dst += dirty->fb_y * dst_pitch + dirty->fb_x * stdu->cpp;
+	dst += ddirty->fb_top * dst_pitch + ddirty->fb_left * stdu->cpp;
 
 
 	/* Figure out the real direction */
@@ -961,7 +972,7 @@ static void vmw_stdu_dmabuf_cpu_commit(struct vmw_kms_dirty *dirty)
 	}
 
 out_cleanup:
-	ddirty->left = ddirty->top = S32_MAX;
+	ddirty->left = ddirty->top = ddirty->fb_left = ddirty->fb_top = S32_MAX;
 	ddirty->right = ddirty->bottom = S32_MIN;
 }
 
@@ -1014,6 +1025,7 @@ int vmw_kms_stdu_dma(struct vmw_private *dev_priv,
 		SVGA3D_READ_HOST_VRAM;
 	ddirty.left = ddirty.top = S32_MAX;
 	ddirty.right = ddirty.bottom = S32_MIN;
+	ddirty.fb_left = ddirty.fb_top = S32_MAX;
 	ddirty.pitch = vfb->base.pitches[0];
 	ddirty.buf = buf;
 	ddirty.base.fifo_commit = vmw_stdu_dmabuf_fifo_commit;
-- 
2.7.4