On Wed, 16 Aug 2017, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> On Fri, Aug 11, 2017 at 02:39:07PM +0300, Jani Nikula wrote:
>> Ever since we've parsed VBT child devices, starting from 6acab15a7b0d
>> ("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
>> ignored the child device information if more than one child device
>> references the same port. The rationale for this seems lost in time.
>>
>> Since commit 311a20949f04 ("drm/i915: don't init DP or HDMI when not
>> supported by DDI port") we started using this information more to skip
>> HDMI/DP init if the port wasn't there per VBT child devices. However, at
>> the same time it added port defaults without further explanation.
>>
>> Thus, if the child device info was skipped due to multiple child devices
>> referencing the same port, the device info would be retrieved from the
>> somewhat arbitrary defaults.
>>
>> Finally, when commit bb1d132935c2 ("drm/i915/vbt: split out defaults
>> that are set when there is no VBT") stopped initializing the defaults
>> whenever VBT is present, thus trusting the VBT more, we stopped
>> initializing ports which were referenced by more than one child device.
>>
>> Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
>> child device blocks which cause this behaviour. Arguably they were
>> shipped with a broken VBT.
>>
>> Relax the rules for multiple references to the same port, and use the
>> first child device info to reference a port. Retain the logic to debug
>> log about this, though.
>>
>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745
>> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233
>> Fixes: bb1d132935c2 ("drm/i915/vbt: split out defaults that are set when there is no VBT")
>> Tested-by: Oliver Weißbarth <mail@xxxxxxxxxxxxxx>
>> Reported-by: Oliver Weißbarth <mail@xxxxxxxxxxxxxx>
>> Reported-by: Didier G <didierg-divers@xxxxxxxxx>
>> Reported-by: Giles Anderson <agander@xxxxxxxxx>
>> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
>> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
>> Cc: <stable@xxxxxxxxxxxxxxx> # v4.12+
>> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
>> ---
>> drivers/gpu/drm/i915/intel_bios.c | 15 +++++++++------
>> 1 file changed, 9 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
>> index 82b144cdfa1d..183e87e8ea31 100644
>> --- a/drivers/gpu/drm/i915/intel_bios.c
>> +++ b/drivers/gpu/drm/i915/intel_bios.c
>> @@ -1120,8 +1120,8 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
>> bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
>> uint8_t aux_channel, ddc_pin;
>> /* Each DDI port can have more than one value on the "DVO Port" field,
>> - * so look for all the possible values for each port and abort if more
>> - * than one is found. */
>> + * so look for all the possible values for each port.
>> + */
>> int dvo_ports[][3] = {
>> {DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
>
> So at least one of the machines has dvo_port==HDMI-A in the VBT
> alongside DP-A. HDMI-A is not really legal on any platform IIRC, so we
> might want to reject it outright. But on the other hand, we've seen a
> lot of VBTs that make a real mess of the dvo_port type vs. the device_type
> bits, and thus we often consider both HDMI and DP dvo_ports to be valid
> for either port type. So I guess it might be possible that there are VBTs
> out there that rely on HDMI-A being picked up.
>
> Either way the patch seems about as sane as anything else relating to VBT so
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Thanks, pushed to drm-intel-next-queued.
BR,
Jani.
>
>> {DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
>> @@ -1130,7 +1130,10 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
>> {DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
>> };
>>
>> - /* Find the child device to use, abort if more than one found. */
>> + /*
>> + * Find the first child device to reference the port, report if more
>> + * than one found.
>> + */
>> for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
>> it = dev_priv->vbt.child_dev + i;
>>
>> @@ -1140,11 +1143,11 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
>>
>> if (it->common.dvo_port == dvo_ports[port][j]) {
>> if (child) {
>> - DRM_DEBUG_KMS("More than one child device for port %c in VBT.\n",
>> + DRM_DEBUG_KMS("More than one child device for port %c in VBT, using the first.\n",
>> port_name(port));
>> - return;
>> + } else {
>> + child = it;
>> }
>> - child = it;
>> }
>> }
>> }
>> --
>> 2.11.0
--
Jani Nikula, Intel Open Source Technology Center