This is a note to let you know that I've just added the patch titled
iio: aspeed-adc: wait for initial sequence.
to the 4.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-aspeed-adc-wait-for-initial-sequence.patch
and it can be found in the queue-4.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 737cc2a593782df6846b3cab7e0f64384f58364a Mon Sep 17 00:00:00 2001
From: Mykola Kostenok <c_mykolak@xxxxxxxxxxxx>
Date: Mon, 17 Jul 2017 12:00:35 +0300
Subject: iio: aspeed-adc: wait for initial sequence.
From: Mykola Kostenok <c_mykolak@xxxxxxxxxxxx>
commit 737cc2a593782df6846b3cab7e0f64384f58364a upstream.
This patch enables adc engine at initialization time and waits
for the initial sequence completion before enabling adc channels.
Without this code adc channels are not functional and shows
zeros for all connected channels.
Tested on mellanox msn platform.
v1 -> v2:
Pointed by Rick Altherr:
- Wait init sequence code enabled by bool
from OF match table.
Signed-off-by: Mykola Kostenok <c_mykolak@xxxxxxxxxxxx>
Reviewed-by: Rick Altherr <raltherr@xxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/adc/aspeed_adc.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -22,6 +22,7 @@
#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
+#include <linux/iopoll.h>
#define ASPEED_RESOLUTION_BITS 10
#define ASPEED_CLOCKS_PER_SAMPLE 12
@@ -38,11 +39,17 @@
#define ASPEED_ENGINE_ENABLE BIT(0)
+#define ASPEED_ADC_CTRL_INIT_RDY BIT(8)
+
+#define ASPEED_ADC_INIT_POLLING_TIME 500
+#define ASPEED_ADC_INIT_TIMEOUT 500000
+
struct aspeed_adc_model_data {
const char *model_name;
unsigned int min_sampling_rate; // Hz
unsigned int max_sampling_rate; // Hz
unsigned int vref_voltage; // mV
+ bool wait_init_sequence;
};
struct aspeed_adc_data {
@@ -211,6 +218,24 @@ static int aspeed_adc_probe(struct platf
goto scaler_error;
}
+ model_data = of_device_get_match_data(&pdev->dev);
+
+ if (model_data->wait_init_sequence) {
+ /* Enable engine in normal mode. */
+ writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+
+ /* Wait for initial sequence complete. */
+ ret = readl_poll_timeout(data->base + ASPEED_REG_ENGINE_CONTROL,
+ adc_engine_control_reg_val,
+ adc_engine_control_reg_val &
+ ASPEED_ADC_CTRL_INIT_RDY,
+ ASPEED_ADC_INIT_POLLING_TIME,
+ ASPEED_ADC_INIT_TIMEOUT);
+ if (ret)
+ goto scaler_error;
+ }
+
/* Start all channels in normal mode. */
clk_prepare_enable(data->clk_scaler->clk);
adc_engine_control_reg_val = GENMASK(31, 16) |
@@ -270,6 +295,7 @@ static const struct aspeed_adc_model_dat
.vref_voltage = 1800, // mV
.min_sampling_rate = 1,
.max_sampling_rate = 1000000,
+ .wait_init_sequence = true,
};
static const struct of_device_id aspeed_adc_matches[] = {
Patches currently in stable-queue which might be from c_mykolak@xxxxxxxxxxxx are
queue-4.12/iio-aspeed-adc-wait-for-initial-sequence.patch