On 8/4/2017 4:52 PM, Dennis Dalessandro wrote:
Dasaratharaman Chandramouli (10):
IB/core: Convert ah_attr from OPA to IB when copying to user
IB/srpt: Increase lid and sm_lid to 32 bits
IB/IPoIB: Increase local_lid to 32 bits
IB/mad: Change slid in RMPP recv from 16 to 32 bits
IB/core: Change port_attr.lid size from 16 to 32 bits
IB/core: Change port_attr.sm_lid from 16 to 32 bits
IB/CM: Create appropriate path records when handling CM request
IB/CM: Set appropriate slid and dlid when handling CM request
IB/rdmavt,hfi1,qib: Enhance rdmavt and hfi1 to use 32 bit lids
IB/hfi1: Enable RDMA_CAP_OPA_AH in hfi driver to support extended LIDs
Leon had some comments with these patches and Don is going to submit an
updated version of these 10. These were submitted previously back in
early June and sat on the list without comment. Hearing no feedback I
rebased them and sent with my other patches so we could get the driver
patches out.
In hindsight we probably should have just submitted another revision to
these 10 and sent the following 11 and the other 6 as a separate series.
If that makes things easier we can still do that. Let me know the
easiest way for you to consume these.
Don Hiatt (11):
IB/core: Change wc.slid from 16 to 32 bits
IB/CM: Add OPA Path record support to CM
IB/rdmavt,hfi1,qib: Modify check_ah() to account for extended LIDs
IB/hfi1: Add support to receive 16B bypass packets
IB/hfi1: Add support to send 16B bypass packets
IB/hfi1: Add support to process 16B header errors
IB/hfi1: Determine 9B/16B L2 header type based on Address handle
IB/hfi1: Add 16B UD support
IB/hfi1: Add 16B trace support
IB/hfi1: Add 16B RC/UC support
IB/hfi1: Enhance PIO/SDMA send for 16B
These will still apply, as will the other 6 patches in this series.
-Denny